location: Current position: Home >> Scientific Research >> Paper Publications

Experimental and numerical analysis of oil shale drying in fluidized bed

Hits:

Indexed by:期刊论文

Date of Publication:2017-05-19

Journal:DRYING TECHNOLOGY

Included Journals:SCIE、EI、Scopus

Volume:35

Issue:7

Page Number:802-814

ISSN No.:0737-3937

Key Words:Fluidized bed dryer; heat and mass transfer; numerical modeling; oil shale

Abstract:The main objective of this work was to experimentally and numerically investigate the Liu Shu River oil shale drying by the means of flue gas in a fluidized bed dryer. Several experiments were performed under different temperatures conditions. The moisture content of oil shale was measured during the experiments. The two-stage drying model was incorporated in computational fluid dynamics (CFD) package FLUENT via user-defined functions (UDF) and utilized for simulation of heat and mass transfer of oil shale drying in the fluidized bed dryer. The simulation results for solid moisture content agreed well with experimental data. The effects of the temperature and velocity of flue gas, initial bed height, and the particle size on the drying characteristics were predicted and analyzed. It is shown that the gas temperature and velocity are the important parameters in the whole drying process. The particle size has more obvious influence in the falling drying period than the constant drying period. The temperatures of gas and solid phases were monitored. It is shown that the so-called near gas distributor zone is the most effective heat transfer zone, which agrees well with the calculated value. The system quickly reached thermal equilibrium, characterizing a nearly isothermal bed. The developed model provides a very good demonstration to describe the oil shale drying in the fluidized bed dryer, and may provide important information for design, optimization of operation conditions.

Pre One:固着纳米液滴润湿及汽—液界面特性的分子动力学模拟

Next One:纳米氩液膜蒸发行为的分子动力学模拟研究