location: Current position: Home >> Scientific Research >> Paper Publications

Model reduction for friction-induced vibration of multi-degree-of-freedom systems and experimental validation

Hits:

Indexed by:期刊论文

Date of Publication:2018-09-01

Journal:INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES

Included Journals:SCIE

Volume:145

Page Number:106-119

ISSN No.:0020-7403

Key Words:Friction-induced vibration; Model reduction; Stability analysis; Mode coupling; Tribometer

Abstract:Most frictional systems are composed of components that are in sliding contact. Thus they have natural contact interfaces on which normal contact forces and tangential friction forces are acting. These real systems are complicated and friction brings further complexity, which presents a challenge to their dynamic analysis and control. In this paper, a model reduction strategy for complicated frictional systems is put forward based on the idea of mode synthesis, and its applications and experimental validation are presented. Firstly, the accuracy of the reduction method and the feasibility of the reduced model in stability analysis are verified on a theoretical multi-degree of-freedom frictional system. Then, a tribometer in the form of a pad-on-disc test rig is designed and built and its corresponding detailed finite element (FE) model is constructed. A specific reduction strategy for this real friction system which involves direct contact at the pad-disc interface, is proposed. It is found that the reduced model with 80 modes of each of the two substructures of the system can already correctly predict the mode-coupling instability of the full FE model (which has over 900,000 degrees of freedom) of the real system, and unstable frequencies that are fairly close to the unstable frequencies of the FE full model computed by Abaqus CEA and the vibration frequencies measured in the test on the tribometer, which demonstrates the efficiency and accuracy of the model reduction strategy for dynamic analysis of real friction systems. Its computational efficiency would be even much greater when applied to nonlinear dynamic analysis of real friction systems. Model reduction for friction-induced vibration validated by experiments has not been reported in the literature.

Pre One:DN450爆破阀开启过程的整机动力学分析

Next One:核主泵叶轮间隙的轴向振动特性研究