学位：博士
职称：教授
所在单位：材料科学与工程学院
长期从事金属材料蠕变、组织演化、损伤及寿命预测工作。主持和参加国家自然科学基金重点和面上项目6项，“863”计划课题2项，省部级及企业项目20余项。获国家发明专利5项，发表学术论文200余篇。出版专著“耐热钢持久性能的统计分析及可靠性预测”1部（科学出版社），译著“高温合金”1部，编著1部。获辽宁省教学名师，宝钢教育奖优秀教师奖。辽宁省教学成果一等奖1项，国家本科一流课程、国家精品在线开放课程负责人。Emerald出版社颁发的学术奖“Literati Club Awards for Excellence”，金属学报2009-2015年度优秀论文奖。省部级科技奖励一等奖、二等奖5项。
Influence of specimen thickness on the creep behavior of a directional solidification nickel-based sulperalloy
点击次数：
论文类型：期刊论文
发表时间：2018-04-01
发表刊物：VACUUM
收录刊物：SCIE、EI
卷号：150
期号：,SI
页面范围：105-115
ISSN号：0042-207X
关键字：Creep; Oxidation; Crack; Creep damage
摘要：The effects of thickness and surface signature on the creep life of a directionally solidified nickel based superalloy were investigated. The creep tests of ground specimens in the thickness of 0.61 mm and 0.89 mm, as well as polished ones with 0.66 mm and 0.87 mm in thickness were performed at 980 degrees C/160 MPa. Based on the experimental results, the thin ones had inferior creep life compared with thick specimens. XRD exhibited that all the specimens were oxidized during the creep tests, however, the non-loading bear zones which caused by oxidation was insufficient to explain the creep life of specimens under different wall thicknesses. On the other hand, the morphology of fracture sections indicated that the interaction of cracks and creep damage could reveal this phenomena. It worth noting that the cracks played a more important role in the creeping of thin specimens, but creep damage influenced the thick specimens more effectly. In addition, the polished specimens had a better behavior during creep tests than the ground ones. (C) 2018 Elsevier Ltd. All rights reserved.
发表时间：2018-04-01
