王轶农

个人信息Personal Information

教授

博士生导师

硕士生导师

任职 : 中国体视学会材料科学分会理事;中国体视学会金相分会理事

性别:男

毕业院校:东北大学

学位:博士

所在单位:材料科学与工程学院

学科:材料学

办公地点:新三束实验室(4号楼)305

联系方式:13390512391

电子邮箱:wynmm@dlut.edu.cn

扫描关注

个人简介Personal Profile

王轶农, 男, 1962.12.31出生, 汉族。

现任大连理工大学材料学院教授,博士生导师。

中国体视学会材料科学分会理事,中国体视学会金相分会理事,辽宁省电子显微镜学会理事。

受教育经历:

1980.09-1984.07, 东北重型机械学院, 金属学及热处理专业, 学士学位;

1987.09-1990.03, 哈尔滨工业大学, 金属材料及热处理专业, 硕士学位;

1996.09-2000.02, 东北大学, 材料与冶金学院,材料学专业, 博士学位;

工作经历:

1984.09-1987.07, 佳木斯大学材料学院,助教;

1990.03-1996.07, 佳木斯大学材料学院,讲师, 副教授;

2000.03-2002.02, 大连理工大学材料学院,博士后;

2002.03-2007.12, 大连理工大学材料学院,副教授;

2002.03-2003.05, 台湾中山大学材料研究所,博士后;

2006.02-2006.09, 台湾中山大学材料研究所,博士后;

2008.08-2009.08, 韩国材料研究所(KIMs),Brain-pool研究员;

2018.03-2018.04, 法国洛林大学织构与材料应用国家实验室(LEM3),访问学者;

2008.01 - 现在,  大连理工大学材料学院,教授,博士生导师。

科研项目:

1. 国家自然科学基金面上项目:“涂层导体用Ni-9W合金自生复合基带微观组织与立方织构演变机制”,51471041, 2015.01-2018.12,项目负者人。

2. 国家自然科学基金面上项目:“非对称热挤压变形镁合金织构与塑形调控及织构形成机制研究”,51271046, 2013.01-2016.12,项目负者人。

3. 国家科技支撑项目:“激光-氩弧复合焊接技术”,2009ZX04007-032,2010.01-2014.12,主要参加人。

4. 辽宁省重点实验室计划项目:“基于非对称热变形制备高塑形镁合金板材及其相关性能研究”,2008S052,2008.01-2010.12, 项目负责人。

5. 国家自然科学基金重点项目:“应力、温度和磁场耦合作用下马氏体相变理论及在新材料设计中的应用”,50531020,2006.01-2009.12。参加单位大连理工大学负责人。

6. 辽宁省自然科学基金:“异步轧制镁合金织构特征与力学性能研究”,20042159,2005.01-2007.12, 项目负责人。

7. 国家自然科学基金面上项目:“变形镁合金基面织构倾转机制与织构增韧研究”,51041069, 2004.01-2006.12, 项目负者人。

8. 国家自然科学基金面上项目:“Ni-Ti-Ta合金的相变、形状记忆效应及相关医学性能研究”,50171015,2003-01至2005-12,项目主要参加人。

      9. 国家“十五”高技术“863”项目:“镁合金先进焊接技术”,2002AA331160, 2003.01-2005.12, 主要参加人。

     科研论文:

1.      Y.N. Wang, C.S. He, X. Zhao, L. Zuo, Z.D. Liang, Effect of Electric Field Annealing on The Recrystallization and Texture of Cold-Rolled Commercial Pure Copper, Acta Metallurgica Sinica, 36(2000):126-130.

2.      Y.N. Wang, B.L. Wu, G. Wang, Q.W. Jiang, X. Zhao, L. Zuo, Recrystallization Texture, CSL Grain Boundary Distribution and Corrosion Resisting Property of LY12 Alloy, Acta Metallurgica Sinica, 36(2000):1085-1088.

3.      L.X. Liu, J.H. Chen, D.Z. Yang, W.Q. Wang, Y.N. Wang, Characterization of TiO2/Ta2O5 Films Synthesized by Ion Beam on NiTi Alloy for Biomedical Application, J. Mater. Sci. Technol. 17(2001): 35-39.

4.      Y.N. Wang, J.C. Huang, Comparison of Grain Boundary Sliding in Fine Grained Mg And Al Alloys during Superplastic Deformation, Scripta Mater., 48 (2003): 1117-1123.

5.      Y.N. Wang, J.C. Huang, Texture Analysis in Hexagonal Materials (review), Mater. Chem. Phys, 81 (2003): 11-22.

6. Y.N. Wang, C.L. Lee, C.C. Huang, H.K. Lin and J.C. Huang, Influence From Extrusion Parameters on High Strain Rate and Low Temperature Superplasticity of AZ Serious Mg-Based Alloys, Mater. Sci. Forum, 426-433 (2003): 2655-2659.

7. Y.N. Wang, J.C. Huang, Texture Characteristics and Anisotropic Superplasticity of AZ61 Magnesium Alloy, Mater. Trans. JIM, 44 (2003): 2276-2281.

8. K.L. Yang, J.C. Huang and Y.N. Wang, Phase Transformation in b phase of Super a2-Ti3Al Base Alloys during Static Annealing and Superplastic Deformation at 700-1000°C, Acta Mater., 51 (2003): 2577-2594.

9. K.L. Yang, J.C. Huang and Y.N. Wang, Phase Evolution and Mechanical Behavior of Super a2-Ti3Al Base Alloys during Superplastic Deformation at Lower Temperatures of 700-900°C, Key Eng. Mater., 233-236 (2003): 881-886.

10. C.S. He, Y.D. Zhang, Y.N. Wang, X. Zhao, L. Zuo, C. Esling, Texture and microstructure development in cold-rolled interstitial free (IF) steel sheet during electric field annealing, Scripta Mater., 48 (2003): 737-741.

11. Y.N. Wang, J.C. Huang, Transition of dominant diffusion process during superplastic deformation in AZ61 magnesium, Metall. Mater. Trans., 35A (2004): 555-561.

12. S.H. WU, J.C. Huang, and Y.N. Wang, Evolution of microstructure and texture in Mg-Zn-Al alloys during electron-beam and gas tungsten arc welding, Metall. Mater. Trans., 35 (2004): 2455-2469.

13. Y.N. Wang, J.C. Huang, SEM investigation on superplastic deformation in Mg-AZ61 alloy sheet, Materials Review, 18 (2004): 230-233.

14. C.W. Gong, Y.N. Wang, D.Z. Yang, Microstructure and transformation behavior of Ni50Ti45Ta5 shape memory alloy, Trans. Nonferrous Met. Soc. China, 14(2004): 952-957.

15. K.L Yang, J.C. Huang and Y.N. Wang, Texture evolution and mechanical Aaisotropy in dual phase Ti3Al based alloy loaded at 700°C and 1000°C, Metall. Mater. Trans., 35A (2004): 3803-3810.

16. Y.N. Wang and J.C. Huang, Superplasticity enhanced by two-stage deformation in a hot-extruded AZ61 alloy magnesium alloy, J. Mater. Sci. Tech., 21(2005): 71-74.

17. Y.N. Wang and J.C. Huang, Anisotropic tensile properties at room temperature and elevated temperature in arm-extruded AZ61 magnesium alloy, Mater. Sci. Forum, 495-497(2005): 657-662.

18. C.W. Gong, Y.N. Wang, D.Z. Yang, X.P. Liu, R-phase transformation of aged Ti-Ni shape memory alloy. Trans. Nonferrous Met. Soc. China, 15(2005): 1237-1241.

19. X.P. Liu, Y.N. Wang, M. Qi, D.Z. Yang, Effects of thermo-high magnetic field coupled aging on phase transformation behavior of Ni-rich Ti-Ni shape memory alloy, Chinese Journal of Nonferrous Metals, 16(2006): 2005-2009.

20. Y.X. Cai, Y.D. Liu, Y.N. Wang, G. Wang, Y.D. Wang, F. Wang, L. Zuo, Analysis of texture formation and microstructure characteristics of cold rolled IF steel sheets, Mater. Sci. Forum, 495-497 (2005): 411-415.

21. B.L. Wu, A.H. Shi, Y.D. Zhang, Y.N. Wang, L. Zuo, C. Esling, The influence of texture and GBCD on stress corrosion and intergranular corrosion in 2024 aluminum alloy, Solid State Phenomena, 105(2005): 181-186.

22. N. Jia, Y.D. Wang, S.D. Wu, W.Z.Han, Y.N. Wang, J.N. Deng, P.K. Liaw, Anomalous hardening in copper due to the growth of deformation-induced micro-twins after annealing, Scripta Mater., 54 (2006): 1247-1252.

23. C.W. Gong, Y. Li, Y.N. Wang, D.Z. Yang, Ab initio study for electronic and crystal structure of NiTi R-phase, Modelling Simul. Mater. Sci. Eng, 14(2006): 33-39.

24. C.W. Gong, Y.N. Wang, D.Z. Yang, Phase transformation and second phases in ternary Ni-Ti-Ta shape memory alloys, Mater .Chem. Phys., 96(2006): 183-187.

25. C.W. Gong, Y.N. Wang, D.Z. Yang, Martensitic transformation of Ni50Ti45Ta5 shape memory alloy. Journal of Alloys and Compounds., 419(2006): 61-65.

26. C.W. Gong, Y.N. Wang, D.Z. Yang, Ab initio study of the martensitic transformation of NiTi shape memory alloys, Acta Physics Sinica, 55(2006): 2877-2881.

27. Y.N. Wang, C.I. Chang, C.J. Lee, H.K. Lin and J.C. Huang, Texture and week grain size dependence in friction stir processed Mg-Al-Zn alloy, Scripta Mater., 55(2006): 637-640.

28. C.I. Chang, Y.N. Wang, H.R. Pei, C.J. Lee, and J.C. Huang, On the hardening of friction stir processed Mg-AZ31 based composites with 5-20% nano-ZrO2 and nano-SiO2 Particles, Mater. Trans. JIM, 47 (2006): 2942-2949.

29. Y.N. Wang, J.C. Huang, The role of twinning and untwinning in yielding behavior in hot-extruded Mg-Al-Zn alloy, Acta Mater., 55(2007): 897-905.

30. T.H Hung, Y.C. Chang, Y.N. Wang, C.W. Tang, J.N. Kuo, H.M. Chen, Y. L. Tsai, J.C. Huang, J.S. Jang, C.T. Liu, Development of Mg based amorphous alloys with higher amounts of rare earth elements, Mater. Trans. JIM, 48(2007): 1621-1625.

31. Z.W.Liu, C.W. Sun, Q.Y. Zhang, Y.N. Wang, B. Wu, Z.X. Jin, Morphology and interface characteristics of ZnO films deposited at room temperature and 750°C, Surface Coating and Technology, 201 (2007): 5422-5426.

32. Y.N. Wang, J.C. Huang, Grain size dependence of yield strength in randomly textured Mg-Al-Zn alloy, Mater. Trans. JIM, 48 (2007): 184-188.

33. I. Chang, Y.N. Wang, H.R. Pei, C.J. Lee, X.H. Du, J.C. Huang, Microstructure and mechanical properties of nano-ZrO2 and nano-SiO2 particulate reinforced AZ31-Mg based composites fabricated by friction stir processing, Key Engineering Materials, 351(2007): 114-119.

34. B.L. Wu, G.Y. Sha, Y.N. Wang, Y.D. Zhang, C. Esling, Grain refinement of an Al-Cu-Mg alloy by microalloying and common thermo-mechanical treatment, Materials Science Forum, 546-549(2007):917-922.

35. L.L. Chang, Y.N. Wang, X. Zhao, J.C. Huang, Microstructure and mechanical properties in an AZ31 magnesium alloy sheet fabricated by asymmetric hot extrusion, Materials Science and Engineering A, 496(2008): 512-516.

36. B. Zheng, Y.N. Wang, M. Qi, C.L. Chen, An examination of surface stress effects and deformation mechanisms in Al–Cu nanowires, Modelling Simul. Mater. Sci. Eng., 16(2008): 1-7.

37. L.L. Chang, Y.N. Wang, X. Zhao, Modeling of severe deformation and mechanical properties in Mg-3Al-1Zn alloy through asymmetric hot-extrusion, Trans. Nonferrous Met. Soc. China, 18(2008): 257-262.

38. X.P. Liu, Y.N. Wang, D.Z. Yang, M. Qi, The effect of ageing treatment on shape setting and superelasticity of a nitinol stent, Mater. Character., 59(2008): 402-406.

39. L.L. Chang, Y.N. Wang, X. Zhao, M. Qi, Grain size and texture effect on compression behavior of hot-extruded Mg–3Al–1Zn alloys at room temperature, Mater. Character., 60(2009): 991-994.B. Zheng,

40. B. Zheng, Y.N. Wang, M. Qi, E.H. Williams, Phase boundary effects on the mechanical deformation of core/shell Cu/Ag nanoparticles, J. Mater. Res., 24 (2009): 2210-2214.

41. L.L. Chang, E.F. Shang, Y.N. Wang, X. Zhao, M. Qi, Texture and microstructure evolution in cold rolled AZ31magnesium alloy, Mater. Character., 60(2009): 487-491.

41.  K.D. Wang, L.L. Chang, Y.N. Wang, J.C. Huang, Preparation of Mg-AZ31 based composites with Ti particles by friction stir processing, Chinese Journal of Nonferrous Metals, 19(2009):418-423.

42.  B. Zheng, W. Zhou, Y.N. Wang, M. Qi, Martensite Transformation in NiTi Alloy Under Coupling Temperature and High Magnetic Field Using Landau Theory Model, Acta Metallurgica Sinica, 45(2009):37-42.

43.    Y.N. Wang, S.B. Kang, J.Y. Cho, Microstructural evolution of twin-roll cast Mg-3Al-0.5Mn-0.2Mm alloy during warm rolling and subsequent annealingJournal of Materials Processing Technology, 210 (2010): 1270-1275.

44.    Y.N. Wang, S.B. Kang, J.Y. Cho, Microstructure and mechanical properties of Mg-Al-Mn-Ca alloy sheet produced by twin roll casting and sequential warm rolling, Journal of Alloys and Compounds, 509 (2011): 704-711.

45.  R. Ma, L. Wang, Y.N. Wang, D.Z. Zhou, Microstructure and mechanical properties of the AZ31 magnesium alloy sheets processed by asymmetric reduction rolling, Materials Science and Engineering A, 638(2015):190-196.

46.  Y. Lu, R. Ma, Y.N. Wang, Texture evolution and recrystallization behaviors of Cu-Ag alloys subjected to cryogenic rolling, Trans. Nonferrous Met. Soc. China, 25(2015):2948-2957.

47.    D.Z. Zhou, Y. Lu, R. Ma, Y.N. Wang, Strain hardening behavior during uniaxial compression of as-extruded AZ31 magnesium alloy, Chinese Journal of Nonferrous Metals, 25(2015):1128-1135.

48.    B. Zheng, Y.N. Wang, M. Qi, H.L. Du, Extended dislocations in plastically deformed metallic nanoparticles, Nanomaterials and Nanotechnology, 6(2016)64100:1-6.

49.    R. Ma, Y.Q. Zhao, Y.N. Wang, Grain refinement and mechanical properties improvement of AZ31 Mg alloy sheet obtained by two-stage rolling, Materials Science and Engineering A, 2017, 691: 81~87.

50.  L.H. Song, B.L. Wu, L. Zhang, X. H. Du, Y.N. Wang, Y. D. Zhang, C. Esling, Cyclic deformation behaviors of AZ31B magnesium alloy in two different asymmetric loading manners, Materials Science and Engineering A, 689(2017):134-141.

51.  X.G. You, Y.Tan, S. Shi,J.M. Yang, Y.N. Wang, J.Y. Li, Q.F. You, Effect of solution heat treatment on the precipitation behavior and strengthening mechanisms of electron beam smelted Inconel 718 superalloy, Materials Science and Engineering A, 689(2017):257-268.

52.  Q.F. You, S. Shi, X.G. You,Y. Tan, Y.N. Wang, J.Y. Li, Evaporation behavior of Ni, Cr and Fe in Inconel 718 superalloy during electron beam smelting, Vacuum, 35(2017):135-141.

53.  L. Wang, Y.Q. Zhao, H.M. Chen, J. Zhang, Y.D. Liu, Y.N. Wang, Improvement of Mechanical Properties of Magnesium Alloy ZK60 by Asymmetric Reduction Rolling, Acta Metall. Sin., 31(2018):63-70.

54.    Y.Q. Zhao, H.M. Chen, J. Zhang, R. Ma, Y.D. Liu, Y.N. Wang, L. Wang, Q. Zhang, W.G. Li, Influences of Asymmetric Reduction Rolling on the Microstructure and Mechanical Properties of AZ91, Acta Metall. Sin., 2018, 31(2018):673-680.

55.    R. Ma, Y. Lu, L. Wang, Y.N. Wang, Influence of rolling route on microstructure and mechanical properties of AZ31 magnesium alloy during asymmetric reduction rolling, Trans. Nonferrous Met. Soc. China, 28(2018):902-911.

56.    X.G. You, Y. Tan, Q.F. You, Y.N. Wang, F. Ye, J.Y. Li, Effect of solution heat treatment on microstructure and electrochemical behavior of electron beam smelted Inconel 718 superalloy,Journal of Alloys and Compounds, 741(2018):792-803.

57.    L.H. Song, B.L. Wu, L. Zhang, X.H. Du, Y.N. Wang, C. Esling, Twinning characterization of fiber-textured AZ31B magnesium alloy during tensile deformation, Materials Science and Engineering A 710(2018):57-65.

      58.    L. Wang, Y.Q. Zhao, J. Zhang, R. Ma, Y.D. Liu, Y.N. Wang, Q. Zhang, W. Li, Y. Zhang, Quantitative analysis on friction stress of hot-extruded AZ31magnesium alloy at room temperature, Journal of

       Materials Science & Technology, 2018, in press. https://doi.org/10.1016/j.jmst.2018.02.011.




  • 教育经历Education Background
  • 工作经历Work Experience
  • 研究方向Research Focus
  • 社会兼职Social Affiliations
  • 电子束物理冶金