陈国清

个人信息Personal Information

教授

博士生导师

硕士生导师

主要任职:材料科学与工程学院副院长

性别:男

毕业院校:哈尔滨工业大学

学位:博士

所在单位:材料科学与工程学院

办公地点:铸造中心208

联系方式:0411-84707970

电子邮箱:gqchen@dlut.edu.cn

扫描关注

论文成果

当前位置: 中文主页 >> 科学研究 >> 论文成果

Influences of Mo/Zr minor-alloying on the phase precipitation behavior in modified 310S austenitic stainless steels at high temperatures

点击次数:

论文类型:期刊论文

发表时间:2017-08-15

发表刊物:MATERIALS & DESIGN

收录刊物:SCIE、EI、Scopus

卷号:128

页面范围:34-46

ISSN号:0264-1275

关键字:Austenitic stainless steels; 310S; Minor-alloying; Microstructural stability; Precipitation behavior

摘要:High-Cr/Ni austenitic stainless steels (ASSs) have attracted more attention as fuel cladding materials of super-critical water reactors due to their excellent comprehensive properties. In order to further improve their microstructural stability at high temperatures, the present work investigated systematically the influences of Mo/Zr contents and Zr/C ratios on the phase precipitation behaviors and mechanical properties of modified 310S ASSs. The designed alloy ingots were hot-rolled, solid-solutioned at 1423 K for 0.5 h, stabilized at 1173 K for 0.5 h, and then aged at 973 K for different hours. The microstructure and precipitated phases at different heat-treatment states were characterized with OM, SEM, EPMA and TEM, respectively. All the results indicated that the excess addition of Mo and Zr and the inappropriate Zr/C ratios would promote the formation of Cr23C6, G-Ni16Si7Zr6 and (Ni, Fe)(23)Zr-6 phases, resulting in the s phase precipitation at the early stabilization stage. Furthermore, the formation mechanism of sigma phase was discussed. The effects of the precipitated phases on the mechanical properties of alloys were then studied. It was found that the Fe-22Ni-25Cr-0.046C-0.37Mo-0.35Zr (wt%) alloy with appropriate Mo content and Zr/C ratio of 1/1 exhibits the best microstructural stability and good tensile mechanical property, in which only a few s particles are precipitated from the matrix even after aging at 973 K for 408 h.