李鹏

Professor   Supervisor of Doctorate Candidates   Supervisor of Master's Candidates

Gender:Male

Alma Mater:西北工业大学

Degree:Doctoral Degree

School/Department:材料科学与工程学院

Discipline:The Joining Technique Of Materials. Materials Processing Engineering

Business Address:大连理工大学材料科学与工程学院铸造中心206室

Contact Information:一三四 七八五五 六八一六

E-Mail:lipeng2016@dlut.edu.cn


Paper Publications

Interfacial microstructure and shear strength of Ti6Al4V alloy/316 L stainless steel joint brazed with Ti33.3Zr16.7Cu50-xNix amorphous filler metals

Hits:

Indexed by:Journal Papers

Date of Publication:2020-02-01

Journal:MATERIALS & DESIGN

Included Journals:EI、SCIE

Volume:187

ISSN No.:0264-1275

Key Words:Vacuum brazing; Wettability; Amorphous filler metal; Interfacial microstructure; Shear strength

Abstract:Ti33.3Zr16.7Cu50-xNix (x = 0-16.5, at%) amorphous filler metals were designed to braze Ti6Al4V alloy and 316 L stainless steel (SS). The effect of Ni addition in filler metals on the wettability, joint microstructure evolution and shear strength were investigated. The reaction phase identification and crack initiation mechanism were analyzed in depth. Ni addition weakened the wettability of the filler metal and thickened the brazed seam. The filler metal with 11 at.% Ni was optimized for brazing of Ti6Al4V alloy/316 LSS with the maximum joint shear strength of 318 MPa, FeTi, Fe2Ti, FeCr, and alpha-Fe phases formed around the transition zone close to 316 L SS substrate, which was the weak part of the brazed joints. The interface between Fell and Fe2Ti phases was non-coherent with the lattice mismatch of 61.4%, initialing the crack at (beta-Ti + FeTi)/Fe2Ti interface. The initiative cracks mainly propagated along the Fe2Ti and FeCr layers with brittle feature. Optimizing the constituents and alloying process for Ti-Cu-based filler metal has huge potential in improving the performance of titanium alloy/steel joint. (C) 2019 The Authors. Published by Elsevier Ltd.

Pre One:Evolution of interface and tensile properties in 5052 aluminum alloy/304 stainless steel rotary friction welded joint after post-weld heat treatment

Next One:Rotary friction welding of AlCoCrFeNi2.1 eutectic high entropy alloy

Profile

       李鹏,男,教授/院长助理,国家重点研发计划青年项目首席科学家。

       入选国际先进材料学会会士(Fellow of IAAM)、全球前2%顶尖科学家、辽宁省兴辽英才计划-青年拔尖人才、大连理工大学星海学者人才培育计划(第八批星海优青、第五批星海骨干)、大连市青年科技之星、大连市高层次人才、中国博士后科学基金百优获得者、人社部博士后国际交流派出计划。目前担任中国机械工程学会焊接学会青年工作委员会常务委员、中国机械工程学会焊接学会熔焊工艺及设备专业委员会委员、中国机械工程学会焊接学会压力焊专业委员会委员、中国机械研究总院兼职博导、中国机械工程学会高级会员、《金属学报(英文版)》青年编委、《稀有金属材料与工程》青年编委、《中国有色金属学报》中-英文版第一届青年编委、焊接杂志社第一届青年编委、《材料开发与应用》第一届青年编委、3个国际SCI期刊客座编辑、国家科学技术学术著作出版基金项目通讯评审专家、Elsevier专著项目、国家自然科学基金通讯评审人、学术桥人才评审专家、教育部学位中心评审专家、省部级优秀博士论文评审专家、全国本科论文(设计)抽检评审专家、解放军5706厂技术顾问、中国有色金属智库认证专家、中国政府采购评审专家、2个国际会议咨询委员会委员、日本金属学会会员等。2019.12-2020.12年赴日本东北大学访学1年。

       主要从事先进材料高性能连接(扩散连接、摩擦焊和钎焊)理论与技术、异种材料连接工艺及冶金机理、新型焊接材料成分设计、新型材料及结构特种焊接制造方面的研究工作。主持国家重点研发计划青年科学家项目、国家自然科学基金项目(3项)、装备预研教育部联合基金-青年人才项目、工信部产业基础再造和制造业高质量发展专项项目(课题负责)、教育部“春晖计划”合作科研项目、中国博士后科学基金特别资助和面上资助项目、辽宁省自然基金等省部级以上纵向项目10余项(国家级6项),JK项目4项;作为技术骨干参与国家重点研发计划、两机专项、GF基础科研、ZF领域基金等重点项目。

       近5年发表SCI论文50余篇,ESI高被引1篇,授权国家发明专利5项,制定行业标准2项。获辽宁省自然科学学术成果奖1项,中国机械工程学会优秀论文1篇,《焊接学报》高影响力论文1篇,《中国有色金属学报》英文版亮点论文1篇等。担任Journal of Materials Science & Technology、Corrosion Science、Materials Science and Engineering A、Materials & Design、Journal of Alloys and Compounds等40余个期刊审稿人,被评为Materials Science and Engineering A和Journal of Manufacturing Processes期刊杰出审稿人(Outstanding reviewer award)。

       所指导学生多次获辽宁省优秀硕士学位论文(20届-王帅,21届-孙浩田)、辽宁省优秀毕业研究生2人、辽宁省研究生材料先进连接技术竞赛一等奖4项、辽宁省大学生焊接创新大赛校赛一等奖、中国大学生机械工程创新创意大赛三等奖2项、校优秀硕士学位论文、校优秀毕业研究生、校优秀毕业设计论文和国家奖学金等荣誉及奖励。

       课题组人文环境宽松,热忱欢迎有志青年(本、硕、博、博士后)加入!