location: Current position: Home >> Scientific Research >> Paper Publications

Spurious mode distinguish by eigensystem realization algorithm with improved stabilization diagram

Hits:

Indexed by:期刊论文

Date of Publication:2017-09-25

Journal:STRUCTURAL ENGINEERING AND MECHANICS

Included Journals:SCIE、EI、Scopus

Volume:63

Issue:6

Page Number:743-750

ISSN No.:1225-4568

Key Words:eigensystem realization algorithm (ERA); spurious mode; stabilization diagram; Hankel matrix; singular value decomposition (SVD)

Abstract:Modal parameter identification plays a key role in the structural health monitoring (SHM) for civil engineering. Eigensystem realization algorithm (ERA) is one of the most popular identification methods. However, the complex environment around civil structures can introduce the noises into the measurement from SHM system. The spurious modes would be generated due to the noises during ERA process, which are usually ignored and be recognized as physical modes. This paper proposes an improved stabilization diagram method in ERA to distinguish the spurious modes. First, it is proved that the ERA can be performed by any two Hankel matrices with one time step shift. The effect of noises on the eigenvalues of structure is illustrated when the choice of two Hankel matrices with one time step shift is different. Then, a moving data diagram is proposed to combine the traditional stabilization diagram to form the improved stabilization diagram method. The moving data diagram shows the mode variation along the different choice of Hankel matrices, which indicates whether the mode is spurious or not. The traditional stabilization diagram helps to determine the concerned truncated order before moving data diagram is implemented. Finally, the proposed method is proved through a numerical example. The results show that the proposed method can distinguish the spurious modes.

Pre One:Frequency Identification of Practical Bridges through Higher-Order Spectrum

Next One:Optimum Value of Negative Stiffness and Additional Damping in Civil Structures