副教授 硕士生导师
性别: 男
毕业院校: 吉林大学
学位: 博士
所在单位: 机械工程学院
学科: 车辆工程
办公地点: 大连理工大学综合2号实验楼318A房间
电子邮箱: jincn@dlut.edu.cn
开通时间: ..
最后更新时间: ..
点击次数:
论文类型: 期刊论文
发表时间: 2013-08-01
发表刊物: INTERNATIONAL JOURNAL OF COMPUTER INTEGRATED MANUFACTURING
收录刊物: SCIE、EI
卷号: 26
期号: 8
页面范围: 720-730
ISSN号: 0951-192X
关键字: CAD; CAM; CNC machining; boundary-conformed tool paths; trimmed free-form surfaces
摘要: Boundary-conformed iso-parametric or streamline-like tool paths are highly desired for machined surfaces requiring extra high finish quality or superior aerodynamic effect in some applications. However, for a trimmed free-form surface, its trimmed boundaries usually do not follow the original iso-parametric curves. As a result, conventional iso-parametric tool path methods are not applied readily on the trimmed surface to generate boundary-conformed tool path, especially on the multiple-trimmed surfaces. In this study, a new method to the problem of boundary-conformed tool path generation on the trimmed surfaces is proposed. The basic idea of the method is to map directly the trimmed surface onto a 2D parametric square domain using mesh mapping technique. Then, the iso-parametric lines on the parametric domain are inversely mapped onto the original trimmed surface to regenerate boundary-conformed tool paths. As the method does not rely on processing on the original parametric domain of the surface patches, it is not limited to the single-trimmed surface and is also well applicable to the multiple-trimmed surfaces and mesh surfaces. The proposed method is implemented and tested on several typical examples to demonstrate its validity and significance.