刘程

个人信息Personal Information

研究员

博士生导师

硕士生导师

任职 : 高分子材料系副系主任

性别:男

毕业院校:大连理工大学

学位:博士

所在单位:化工学院

学科:高分子材料. 高分子化学与物理. 功能材料化学与化工

办公地点:大连理工大学西部校区化工实验楼A407室

联系方式:Tel.: 0411-84986191

电子邮箱:liuch1115@dlut.edu.cn

扫描关注

论文成果

当前位置: 中文主页 >> 科学研究 >> 论文成果

Effect of NaA zeolite particle addition on poly(phthalazinone ether sulfone ketone) composite ultrafiltration (UF) membrane performance

点击次数:

论文类型:期刊论文

发表时间:2009-12-01

发表刊物:JOURNAL OF MEMBRANE SCIENCE

收录刊物:SCIE、EI、Scopus

卷号:345

期号:1-2

页面范围:5-12

ISSN号:0376-7388

关键字:Poly(phthalazinone ether sulfone ketone); NaA zeolite particles; Ultrafiltration membrane; Hydrophilicity

摘要:PPESK is of particular interest in the fabrication of OF membrane for its considerable mechanical strength, thermal stability and chemical resistance. However, its use in aqueous phase is restricted due to its hydrophobicity. NaA zeolite is one of most hydrophilic inorganic material with low atom ratio of Si:AI (1:1) and big channel diameter and good comprehensive performance which may have the potential to improve the properties of PPESK. Composite ultrafiltration (UF) membranes with entrapped NaA zeolite particles were prepared from poly(phthalazinone ether sulfone ketone) (PPESK). The membranes were prepared with phase inversion process and were characterized by OF experiments and scanning electron microscope (SEM) observations. At 3 wt.% NaA content, the composite membranes held excellent water permeability, hydrophilicity and good antifouling ability with enhanced retentions. Higher NaA content (than 3 wt.%) caused a particle aggregation to some extent according to the cross-section and external surface morphology. However, the excess incorporation of the zeolite particles did not cause decline of membrane performance according to the OF experiments. Antifouling performance was tested with resistance-in-series Model and flux decline in Titan Yellow dye solution. Thermal analysis (DSC) was performed in order to investigate the interactions between NaA particles and PPESK. PPESK OF membranes with different molecular weight cut-off (MWCO) and high flux were obtained by adjusting the polymer concentration. It was concluded that the membrane prepared in our laboratory had better performance than two kinds of commercial OF membranes. (C) 2009 Elsevier B.V. All rights reserved.