点击次数：

论文类型：期刊论文

第一作者：Yu, Jiachen

通讯作者：Wu, ZL (reprint author), Dalian Univ Technol, Sch Optoelect Engn & Instrumentat Sci, Dalian 116023, Peoples R China.

合写作者：Wu, Zhenlin,Yang, Xin,Han, Xiuyou,Zhao, Mingshan

发表时间：2018-12-01

发表刊物：SENSORS

收录刊物：SCIE、PubMed、Scopus

卷号：18

期号：12

ISSN号：1424-8220

关键字：optical fiber hydrogen sensor; palladium membrane; electroless plating; tilted fiber Bragg grating

摘要：A tilted fiber Bragg grating (TFBG) hydrogen sensor coated with a palladium (Pd) membrane by the electroless plating method is proposed in this paper. A uniform layer of Pd metal is fabricated in aqueous solutions by the chemical coating method, which is used as the sensitive element to detect the change of the surrounding refractive index (SRI) caused by hydrogen absorption. The change in SRI causes an unsynchronized change of the cladding modes and the Bragg peak in the TFBG transmission spectrum, thereby eliminating the cross-sensitivity due to membrane expansion and is able to simultaneously monitor the presence of cracks in the pipe, as well as the hydrogen leakage. By subtracting the wavelength shift caused by fiber expansion, the change of SRI, i.e., the information from the H-2 level, can be separately obtained. The drifted wavelength is measured for the H-2 concentration below the hydrogen explosion limit between 1% and 4%. The chemical-based coating has the advantages of a low cost, a simple operation, and being suitable for coating on long fiber structures. The proposed sensor is able to detect the H-2 signal in 5 min at a 1% H-2 concentration. The proposed sensor is proved to be able to monitor the hydrogen level without the cross-sensitivity of temperature variation and expansion strains, so could be a good candidate for security applications in industry.