郭东明

个人信息Personal Information

教授

博士生导师

硕士生导师

性别:男

毕业院校:大连理工大学

学位:博士

所在单位:机械工程学院

电子邮箱:guodm@dlut.edu.cn

扫描关注

论文成果

当前位置: 中文主页 >> 科学研究 >> 论文成果

Development of a novel chemical mechanical polishing slurry and its polishing mechanisms on a nickel alloy

点击次数:

论文类型:期刊论文

发表时间:2020-03-15

发表刊物:APPLIED SURFACE SCIENCE

收录刊物:EI、SCIE

卷号:506

ISSN号:0169-4332

关键字:Ni alloy; CMP; Environment friendly; XPS; Infrared spectroscopy

摘要:Conventional chemical mechanical polishing (CMP) slurries of pure nickel (Ni) and its alloys usually consist of toxic and corrosive acids, which is dangerous and contaminative to the operators and environment. It is a big challenge to develop a novel environment friendly CMP slurry for Ni alloys. In this study, a novel environment friendly CMP slurry was developed, containing of silica, hydrogen peroxide (H2O2), malic acid and deionized water. The surface roughness R-a, and peak-to-valley (PV) values are 0.44, and 4.49 nm, respectively with an area of 71 x 53 mu m(2). To the best of our knowledge, surface roughness in this work is the lowest for pure Ni and its alloys at a scan area of 71 x 53 mu m(2). The CMP mechanisms are elucidated by electrochemical, X-ray photoelectron spectroscopy, and infrared measurements. Firstly, H2O2 dominated the oxidation process in CMP, forming oxides of nickel (Ni), chromium (Cr), and molybdenum (Mo) on the surface of Ni alloy. Then, the Ni oxides were dissolved by hydrogen (H) ions. The oxides of Cr and Mo were stable in malic acid. Chelating formulas are proposed between malic acid and Ni ions. Finally, the passivated film was removed by the polishing pad.