孟相宇

个人信息Personal Information

副教授

博士生导师

硕士生导师

性别:男

毕业院校:大连理工大学

学位:博士

所在单位:化工学院

学科:安全科学与工程. 化工过程机械

电子邮箱:mengxiangyu@dlut.edu.cn

扫描关注

论文成果

当前位置: 中文主页 >> 科学研究 >> 论文成果

Experimental study of using additive in the pilot fuel on the performance and emission trade-offs in the diesel/CNG (methane emulated) dual-fuel combustion mode

点击次数:

论文类型:期刊论文

发表时间:2019-07-05

发表刊物:APPLIED THERMAL ENGINEERING

收录刊物:EI、SCIE

卷号:157

ISSN号:1359-4311

关键字:Pilot fuel property; N-butanol additive; Emission trade-off; Dual-fuel; Performance

摘要:In this work, diesel-n-butanol blends as the pilot fuel were studied to explore the possibility of improving the performance and emissions in the dual-fuel combustion mode with CNG, and the trade-offs among NOx, THC and CO were also discussed. The pilot fuels including BO (pure diesel), B10 (90% diesel/10% n-butanol) and B20 (80% diesel/20% n-butanol) were compared under two engine loads. The experiments were conducted by sweeping a wide pilot fuel start of injection (SOI) timings at two CNG substitution rates for each load. For 5 bar indicated mean effective pressure (IMEP), B10CNG40 (at the 40% CNG substitution rate) reveals the highest indicated thermal efficiency CITE) and lowest THC emissions. While it results in slightly higher NOx emission. B20CNG70 can significantly reduce the NOx emission due to better homogeneity and higher evaporation latent heat of n-butanol. The obvious trade-offs between NOx and THC, NOx and CO can be observed at the retarded pilot fuel SOI timings. For 7.5 bar IMEP, B10CNG60 and B20CNG60 can improve ITE and lower the THC emissions, while maintaining the equivalent level of NOx emission relative to the cases at the 80% CNG substitution rate. Adding n-butanol leads to the trade-off between THC and CO emissions.