张伟
开通时间:..
最后更新时间:..
工作经历
2017/12 - 至今, 大连理工大学,教授,博士生导师
2011/05 - 2017/11,大连理工大学,副教授,博士生导师
2008/08 - 2011/04,英国Surrey大学,Research Fellow,师从英国皇家工程院院士R.Silva教授
2018/03 - 2018/04, 新西兰Auckland大学,高级访问学者
2017/09 - 2017/10, 加拿大Toronto大学,青年科学家访问学者
教育经历
2004/04 - 2008/07,英国Leeds大学,博士
1999/09 - 2004/03,大连理工大学,化工学院,硕士
1995/09 - 1999/07,大连理工大学,化工学院,学士
个人获奖
Ø 辽宁省自然科学奖二等奖
Ø 辽宁省科技进步奖二等奖
Ø 辽宁省优秀研究生导师团队奖
Ø 辽宁省优秀硕士学位论文指导教师奖
Ø 大连市高端人才
Ø 大连市技术发明奖二等奖
Ø 钱令希青年教师力学奖
Ø 大连理工大学优秀研究生指导教师奖
Ø 大连理工大学优秀来华留学生指导教师奖
Ø 大连理工大学教学质量优良奖
Ø 国家优秀留学生奖
Ø 英国政府ORS奖
Ø 英国Leeds大学Tetley and Lupton奖
Ø 美国Gordon Research Conference的Green Chemistry Award奖
学术兼职
Ø Beni-Suef University Journal of Basic and Applied Sciences 副主编
Ø Molecular & Cellular Biomechanics 编委
Ø Frontiers in Bioengineering and Biotechnology、Magnetochemistry客编
Ø 国家自然科学基金评审专家
Ø 塞尔维亚国家科学基金评审专家
Ø 以色列高等教育规划委员会基金评审专家
Ø 埃及Beni-Suef大学博士学位论文外审专家
Ø 英国利物浦大学Honorary Staff
指导学生学术获奖
Ø 辽宁省优秀硕士学位论文(冯亮亮-2016,张润润-2017,孙伟皓-2021,周冠林-2023)
Ø 大连理工大学优秀博士论文特别奖学金(金鑫-2021, 李姮-2022)
Ø International Society of Bionic Engineering组织的 International Bionic Innovation Competition-second prize(王森、熊月娇-2017)
Ø 研究生国家奖学金(张润润-2016,左旭东-2017、孙伟皓-2019、金鑫-2020、王超-2021)
Ø 大连理工大学硕士学术之星(张润润-第八届2016)
Ø 大连理工大学优秀硕士学位论文(冯亮亮-2016、张润润-2017、随静萍-2017,孙伟皓-2021,周冠林-2023)
Ø 钱令希力学奖(冯亮亮-2015、吴樊-2015、左旭东-2016、张润润-2016、金鑫-2019、孙伟皓-2020、魏成雄、李姮、周冠林-2021)
研究方向
从事力学、材料、生物医学等交叉学科研究,主要方向包括:复合材料力学,软物质力学,生物材料与仿生力学,细胞力学,智能材料与结构优化设计。
Ø 在Nano Energy (IF:17.6), Small (IF:13), Composites Part B:Engineering (IF:13.1), Carbohydrate Polymers(IF:11.2), Journal of Materials Science & Technology (IF:10.9), Carbon(IF:10.9), Acta Biomaterialia(IF:9.7)等发表SCI论文90余篇, 封面论文5篇, 被引>2400次,H-index:25,单篇最高被引>540次
Ø 授权国家发明专利30项,软件著作权10项,美国发明专利1项。
Ø 主持国家重点研发计划项目(政府间重点专项)1项
Ø 主持国家重点研发计划项目(变革性技术关键科学问题专项)课题1项
Ø 主持国家自然科学基金和省部级项目等12项
欢迎力学,以及材料、生物医学、化学等背景同学加入,一起做有意义的研究工作!
代表作:
1. Min Chen, Chengwei Wu, Wei Zhang*, Hydrogel sensors in an IoT system for self-monitoring and remote monitoring of massage pressure, ACS Applied Materials and Interfaces, DOI:10.1021/acsami.4c09265. Impact Factor: 8.3
2. Chao Wang, Guanlin Zhou, Xu Guo, Wei Zhang*, Chengwei Wu, Electrical stimulation promotes endocytosis of magnetic nanoparticles by cancer cells, Small, 2024, 20, 2403381. Impact Factor: 13
3. Xin Jin, Chengxiong Wei, Kai Li, Peinan Yin, Chengwei Wu, Wei Zhang*, Polyphenol- mediated injectable hydrogel with short gelation time and high adhesion strength for wound healing, Carbohydrate Polymers, 2024, 342, 122372. Impact Factor: 11.2
4. Sadegh Ghorbanzadeh, Wei Zhang*, Advances in MXene-Based Triboelectric Nanogenerators, Nano Energy, 2024, 125, 109558. Impact Factor: 17.6
5. Guanlin Zhou, Chao Wang, Chengwei Wu, Wei Zhang*, Active learning model for extracting elastic modulus of cell on substrate, Biophysical Journal, 2023, 122(12), 2489-2499. Impact Factor: 3.4
6. Vanja Tadic,Wei Zhang,Anamaria Brozovic*,The high-grade serous ovarian cancer metastasis and chemoresistance in 3D models, BBA-Reviews on Cancer, 2024, 1879, 189052. Impact Factor: 11.2
7. Gopal Niraula, Chengwei Wu, Xiaogang Yu, Sonia Malik, Dalip Singh Verma, Rengpeng Yang, Boxiong Zhao, Shuaiwen Ding, Wei Zhang*, Surender Kumar Sharma*, The Curie Temperature: A Key Playmaker in Self-Regulated Temperature Hyperthermia, Journal of Materials Chemistry B, 2024, 12, 286-331. Inside front cover. Impact Factor: 7.0
8. Guanlin Zhou, Min Chen, Chao Wang, Xiao Han, Chengwei Wu, Wei Zhang*, Machine learning method for extracting elastic modulus of cells, Biomechanics and Modeling in Mechanobiology, 2022, 21:1603-1612, Impact factor:3.5
9. Chengxiong Wei, Chengwei Wu, Xin Jin, Peinan Yin, Xiaogang Yu, Chao Wang, Wei Zhang*,CT/MR detectable magnetic microspheres for temperature-controllable hyperthermia and transcatheter arterial chemoembolization, Acta Biomaterialia, 2022, 153, 453-464. Impact Factor: 9.7
10. Xin Jin, Chengxiong Wei, Chengwei Wu, Wei Zhang*,Gastric fluid-induced double network hydrogel with high swelling ratio and long-term mechanical stability, Composites Part B: Engineering, 2022, 236,109816, Impact Factor: 13.1
11. Chengxiong Wei, Xin Jin, Chengwei Wu, Wei Zhang*, The injectable composite hydrogel for photothermal therapy of bone tumor and bone regeneration, Journal of Materials Science and Technology, 2022, 118, 64-72. Impact Factor: 10.9
12. Weihao Sun, Peinan Yin, Chao Wang, Yifei Ren, Xiao Han, Chengwei Wu, Wei Zhang*, Determination of the elastic modulus of adherent cells using spherical atomic force microscope probe, Journal of Materials Science, 2021, 56(32), 18210-18218. Impact Factor:4.5
13. Chao Wang, Guanlin Zhou, Xiaosong Wang, Jinguo Liu, Dong Li, Chengwei Wu, Wei Zhang*, Composite hydrogel membrane with high mechanical strength for treatment of dye pollutant, Separation and Purification Technology, 2021, 275, 119154. Impact Factor: 8.6
14. Heng Li, Jinming Li, Shenbo Yu, Chengwei Wu, Wei Zhang*, The mechanical properties of tibiofemoral and patellofemoral articular cartilage in compression depend on anatomical regions, Scientific Reports, 2021,11, 6128. Impact Factor: 4.6
15. Weihao Sun, Jianli Ma, Heng Li, Chengwei Wu, Wei Zhang*, Precise determination of elastic modulus of cell using conical AFM probe, Journal of Biomechanics, 2021,118, 110277. Impact Factor: 2.4
16. Renpeng Yang, Xiaogang Yu, Heng Li, Chao Wang, Chengwei Wu, Wei Zhang*, Weihong Guo*, Effect of Mg doping on magnetic induction heating of Zn-Co ferrite nanoparticles, Journal of Alloys and Compounds, 2021, 851, 156907. Impact Factor: 6.2
17. Chengwei Wu*, Wei Zhang, Xiao Han, Yuxiang Zhang, Guojun Ma, A systematic review for structure optimization and clamping load design of large proton exchange membrane fuel cell stack, Journal of Power Sources, 2020,476, 228724. Impact Factor: 9.2
18. Wei Zhang, Weihao Sun, Wenling Xiao, Xuyan Zhong, Chengwei Wu, Weihong Guo, Numerical simulation analysis of microstructure of dielectric layers in capacitive pressure sensors, IEEE Sensors Journal, 2019, 19(9): 3260-3266. Impact Factor:4.3
19. Wei Zhang, Xin Jin, Heng Li, Chengxiong Wei, Chengwei Wu,Onion-structure bionic hydrogel capsules based on chitosan for regulating doxorubicin release, Carbohydrate Polymers, 2019,209,152-160. Impact Factor: 11.2
20. Wei Zhang, Lifu Liu, Yuejiao Xiong,Yifan Liu, Shengbo Yu, Chengwei Wu, weihong Guo, Effect of in vitro storage duration on measured mechanical properties of brain tissue, Scientific Reports, 2018,8,1247. Impact Factor: 4.6
21. Wei Zhang, Xin Jin, Heng Li, Runrun Zhang, Chengwei Wu, Injectable and body temperature sensitive hydrogels based on chitosan and hyaluronic acid for pH sensitive drug release, Carbohydrate Polymers, 2018, 186, 82-90. Impact Factor:11.2
22. Lu Jiang, Wei Zhang, Chengwei Wu, Shape optimization of energy storage flywheel rotor,Structural and Multidisciplinary Optimization, 2017, 55(2),739-750. Impact Factor: 3.9
23. Wei Zhang, Runrun Zhang, Chenggang Jiang, Chengwei Wu, Effect of pillar height on the wettability of micro-textured surface:Volume-of-Fluid simulations, International Journal of Adhesion and Adhesives, International Journal of Adhesion & Adhesives, 2017, 74 , 64-69. Impact Factor: 3.4
24. Wei Zhang, Runrun Zhang,Liangliang Feng, Yang Li, Fan Wu, Chengwei Wu, Mechanical response of brain stem in compression and the differential scanning calorimetry and FTIR analyses, ASME Journal of Applied Mechanics, 2016, 83(9): 091005. Impact Factor: 2.6
25. Wei Zhang, Liangliang Feng, Fan Wu, Runrun Zhang Chengwei Wu, Micro/nano-particle decorated metal wire for cutting soft matter, Nanotechnology, 2016, 27(35), 355708. Impact Factor: 3.5
26. Wei Zhang, Runrun Zhang, Fan Wu, Liangliang Feng, Shengbo Yu, Cheng-wei Wu. Differences in the viscoelastic features of white and grey matter in tension. Journal of Biomechanics, 2016, 49 (16): 3990-3995. Impact Factor: 2.4
27. Bo Liu, Mingying Wei, Wei Zhang, Chengwei Wu, Effect of impact acceleration on clamping force design of fuel cell stack, Journal of Power Sources, 2016, 303, 118-125. Impact Factor: 9.2
28. Bo Liu, Mingying Wei, Guojun Ma, Wei Zhang, Chengwei Wu, Stepwise optimization of endplate of fuel cell stack assembled by steel belts, International Journal of Hydrogen Energy, 2016, 41 (4), 2911-2918. Impact Factor: 7.2
29. Cheng-wei Wu, Bo Liu, Mingying Wei, Wei Zhang*,Mechanical response of a large fuel cell stack to impact: A numerical analysis, Fuel Cells, 2015,15(2):344-351. Impact Factor: 2.8
30. Zhang, C. W. Wu,Effect of clamping load on the performance of Proton Exchange Membrane Fuel Cell stack and its optimization design: A review of modeling and experimental research. Journal of Electrochemical Energy Conversion and Storage., 2014, 11(2): 021012. Impact Factor: 2.5
31. Zhaodan Zhu, Chengwei Wu, Wei Zhang*, Frequency analysis and anti-shock mechanism of woodpecker’s head structure, Journal of Bionic Engineering, 2014,11(2):282-287. Impact Factor: 4
32. D. Zhu, W. Zhang, C. W. Wu, Energy conversion in woodpecker on successive peckings and its role on anti-shock protection of brain, Science China Technological Sciences, 2014,57(7):1269-1275. Impact Factor:4.6
33. Wei Zhang, Les Johnson, S. Ravi P. Silva, M. K. Lei, The effect of plasma modification on the sheet resistance of nylon fabrics coated with carbon nanotubes, Applied Surface Science, 2012, 258 (20): 8209-8213. Impact Factor: 6.7
34. Wei Zhang, Chengwei Wu, Chenzhao Zhang, Zhen Chen, Numerical study of the mechanical response of turtle shell, Journal of Bionic Engineering, 2012, 9(3): 330-335.Impact Factor: 4
35. Wei Zhang, S. Ravi P. Silva, Application of carbon nanotubes in polymer electrolyte based fuel cells, Reviews on Advanced Materials Science, 2011, 29(1), 1-14. Impact Factor:3.6
36. Wei Zhang, Ravi Silva. The effects of phenolic hydrogens and methyl substitute groups in organic dyes on their dispersion of multiple-walled carbon nanotubes, Carbon, 2010, 48(7): 2063-2071. Impact Factor: 10.9
37. Wei Zhang, Richard S. Blackburn, Abbas A. Dehghani-Sanij, Effect of silica concentration on electrical conductivity of epoxy resin-carbon black-silica nanocomposites, Scripta Materialia, 2007, 56(7), 581-584. Impact Factor: 6.0
38. Wei Zhang, Weihao Sun, Jinali Ma, Chengwei Wu, Modified method to fit cell modulus based on Sneddon model, US Patent 0124/0462PUS1