陈文炯 (副教授)

副教授   硕士生导师

性别:男

毕业院校:大连理工大学

学位:博士

在职信息:在职

所在单位:船舶工程学院

电子邮箱:

   
   

个人简介

陈文炯,博士,副教授,硕士生导师。

2008年毕业于大连理工大学工程力学系,获得工学学士学位,同年保送本系直博生,2014年获得工程力学专业博士学位,随后进入船舶工程学院博士后流动站,期间赴澳大利亚悉尼大学从事合作研究1年,2016年出站留校任讲师,2018.12晋升副教授。

主要研究方向为减振降噪材料/结构多尺度设计、考虑增材制造的结构设计方法,提出了高刚度高阻尼材料、兼具拉胀和带隙隔振特性的机械超材料、多腔式水下吸声覆盖层等设计理论和创新新构型。主持 1项国家自然科学青年基金项目,1 项JW创新特区项目,1 项航空科学基金,1 项中国博士后基金面上基金项目,作为骨干成员参加国家自然科学基金重点项目、973课题等。在国内外重要期刊(如 Computers & Structures, Structural and Multidisciplinary Optimization, Smart Materials and Structures,Applied Acoustics等)发表论文 20 余篇。

在读研究生5人,获校优秀研究生1人,国家奖学金1人。

欢迎对振动与噪声控制、结构优化、数值模拟等相关领域有兴趣的同学加入我们!

联系方式:wjchen@dlut.edu.cn

办公室地点:综合实验2号楼509室


发表论文:

  1. Chen Wenjiong, Tian Xiangyu, Gao Renjing, Liu Shutian*. A low porosity perforated mechanical metamaterial with negative Poisson’s ratio and band gaps. Smart Materials and Structures, 2018, 27: 115010. (SCI/EI)

  2. Chen Wenjiong, Tong Liyong, Liu Shutian. Design of periodic unit cell in cellular materials with extreme properties using topology optimization. Journal of Materials: Design and Applications, 2018, 232: 852-869. (SCI/EI)

  3. Chen Wenjiong, Zheng Xiaonan, Liu Shutian*. Finite-element-mesh based method for modeling and optimization of lattice structures for additive manufacturing. Materials, 2018, 11(11): 2073(SC/EI)

  4. Chen Wenjiong, Tong Liyong, Liu Shutian*. Concurrent topology design of structure and material using a two-scale topology optimization. Computers & Structures, 2017, 178 :119-128. (SCI/EI)

  5. Chen Wenjiong, Liu Shutian*. Microstructural topology optimization of viscoelastic materials for maximum modal loss factor of macrostructures. Structural and Multidisciplinary Optimization, 2016, 53:1-14. (SCI/EI)

  6. Chen Wenjiong, Liu Shutian *, Tong Liyong, Li Sheng. Design of multi-layered porous fibrous metals for optimal sound absorption in the low frequency range. Theoretical and Applied Mechanics Letters, 2016, 6(1): 42-48.

  7. Chen W, Liu S. Topology optimization of microstructures of viscoelastic damping materials for a prescribed shear modulus[J]. Structural and Multidisciplinary Optimization, 2014, 50(2): 287-296.(SC/EI)

  8. Li Quhao, Chen Wenjiong, Liu Shutian *,Jiaxing Wang. A novel implementation of asymptotic homogenization for viscoelastic composites with periodic microstructures. Composite Structures, 2019, 208: 276-286. (SC/EI)

  9. Liu S, Chen W, Zhang Y. Design optimization of porous fibrous material for maximizing absorption of sounds under set frequency bands[J]. Applied Acoustics, 2014, 76: 319-328.(SCI/EI)

  10. Li Quhao, Chen Wenjiong, Liu Shutian*, Fan Huiru. Topology optimization design of cast parts based on virtual temperature method. Computer-Aided Design, 2018, 94: 28-40. (SCI/EI)

  11. Li Quhao,Chen Wenjiong, Liu Shutian*, Tong Liyong. Structural topology optimization considering connectivity constraint. Structural and Multidisciplinary Optimization, 2016, 54: 971-984.(SCI/EI)

  12. Rui Hu, Wenjiong Chen, Quhao Li; Shutian Liu*. Design optimization method for additive manufacturing of the primary mirror of a large-aperture space telescope. Journal of Aerospace Engineering, 2017, 30(3): 04016093. (SCI/EI)

  13. Liu Shutian*, Li,Quhao, Chen Wenjiong, Tong Liyong. H-DGTP—a Heaviside-function based directional growth topology parameterization for design optimization of stiffener layout and height of thin-walled structures. Structural and Multidisciplinary Optimization,2015, 52:903-913. (SCI5/EI)

  14. Liu Shutian *, Quhao Li, Chen Wenjiong, Cheng Gengdong. An identification method for enclosed voids restriction in manufacturability design for additive manufacturing structures. Frontiers of Mechanical Engineering,2015, 10 (2):126-137 

  15. Liu Shutian*, Li Quhao, Liu Junhuan, Chen Wenjiong*, Zhang Yongcun. A realization method for transforming a topology optimization design into additive manufacturing structures. Engineering, 2018, 4(2): 277-285. (SCI/EI)

  16. 陈文炯,刘书田,张永存.基于拓扑优化的自发热体冷却用植入式导热路径设计方法.力学学报, 2016,48 (2):406-412 

  17. 高仁璟,张莹,赵剑,陈文炯*,刘书田, 仝立勇.面向结构形状控制的压电纤维复合薄膜驱动器布局方式与控制参数协同优化设计.机械工程学报, 18 :177-183 

  18. 白伟, 李取浩, 陈文炯, 刘书田. 基于映射的拓扑优化最大尺寸控制方法. 工程力学, 2017, 34(9): 18-26. (EI)

  19. 张南, 张永存, 陈文炯, 吴书豪, 刘书田. 含流道微桁架夹层面板隔热性能评估方法. 复合材料学报, 2017, 34(4): 850-858(EI)

  20. 刘书田,李取浩,陈文炯,张永存. 拓扑优化与增材制造结合: 一种设计与制造一体化方法. 航空制造技术, 2017, 529(10): 26-31.

教育经历

[1]   2008.9-2014.1

大连理工大学  |  工程力学  |  博士

[2]   2004.9-2008.7

大连理工大学  |  工程力学  |  学士

[3]   2001.9-2004.7

慈溪中学

工作经历

[1]   2016.1-至今

大连理工大学船舶工程学院  |  讲师

[2]   2014.2-2016.1

大连理工大学船舶工程学院  |  博士后

研究方向

  • [1]   面向增材制造的结构优化设计方法
  • [2]   粘弹性阻尼材料微结构设计与阻尼机理研究
  • [3]   纤维型吸声材料性能分析与优化设计研究
  • [4]   结构减振降噪数值分析方法研究