Title of Paper:Numerical and experimental investigations on temperature distribution of plain-woven aramid fiber-reinforced plastics composites with low-mild spindle velocities

Hits:

Date of Publication:2018-10-01

Journal:INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY

Included Journals:SCIE

Volume:99

Issue:1-4,SI

Page Number:613-622

ISSN No.:0268-3768

Key Words:Plain-woven AFRP composites; Temperature distribution; Drilling; Low-mild spindle velocity

Abstract:Temperature distribution of plain-woven aramid fiber-reinforced plastics (AFRP) composites was investigated by numerical and experimental methods for their drilling process with low-mild spindle velocities. A three-dimensional (3-D) numerical model was proposed for predicting the temperature distribution. Drilling experiments were carried out to verify the proposed numerical model and investigate the thermal damages with low-mild spindle velocities. The accuracy of the proposed numerical model was acceptable with less than 8% relative errors compared with experimental results. Cutting heat easily accumulated even the AFRP composites were drilled with low-mild spindle velocities for their poor thermal conductivity. Temperature distributions presented a rounded diamond shape, which diagonal direction was consistent with the fiber direction. With the high heat accumulation, although the drilled hole wall was damaged by the high temperature, carbonation phenomenon was not serious for the low spindle velocity drilling. For the mild spindle velocity drilling case, a serious carbonation phenomenon had been observed, and the heat-affected layer in the hole wall was about 0.3 mm.