点击次数：

发表时间：2013-01-01

发表刊物：计算机集成制造系统

期号：9

页面范围：2244-2250

ISSN号：1006-5911

摘要：Thermal cutting and welding usually act on components orderly in shipbuilding, and the coupled residual stresses with complex distribution was induced during this process, which led to difficulty in analyzing the residual stresses distribution. To tackle this problem, the numerical calculation model for the typical process that butt welding between two plates cut by oxygen flame was studied based on thermal elastic-plastic finite element method. The distribution and evolution of coupled residual stresses were analyzed. The results demonstrated that there was a region that the tensile stress values exceeded the yield point of material along the weld seam, and the width of this region was higher than those of cutting and welding execution respectively. The stresses with longer distance away from the weld seam were not only influenced by the temperature itself, but also the compressive stresses induced by welding heat source, so it appeared as the increasing tensile stresses, and the influence of initial cutting residual stresses on the final coupled residual stresses depended on the gradient magnitude of temperature.

备注：新增回溯数据