- Effect of additives on the performance and morphology of sulfonated copoly (phthalazinone biphenyl ether sulfone) composite nanofiltration membranes
- 点击次数：
- 论文类型： 期刊论文
- 发表时间： 2014-03-15
- 发表刊物： APPLIED SURFACE SCIENCE
- 收录刊物： SCIE、EI、Scopus
- 卷号： 295
- 页面范围： 130-136
- ISSN号： 0169-4332
- 关键字： Sulfonated copoly (phthalazinone biphenyl ether sulfone); Composite membranes; Nanofiltration; Additives; Membrane performance
- 摘要： Sulfonated copoly (phthalazinone biphenyl ether sulfone) (SPPBES) composite nanofiltration membranes were fabricated by adding low molecular weight additives into SPPBES coating solutions during a dip coating process. Three selected additives: glycol, glycerol and hydroquinone were used in this work. The effect of additives on the membrane performance was studied and discussed in terms of rejection and permeation flux. Among all the composite membranes, the membrane prepared with glycol as an additive achieved the highest Na2SO4 rejection, and the membrane fabricated with glycerol as an additive exhibited the highest flux. The salts rejection of SPPBES composite membranes increased in the following order MgCl2 < NaCl <= MgSO4 < Na2SO4. The morphologies of the SPPBES composite membranes were characterized by SEM, it was found that the membrane prepared with hydroquinone showed a rough membrane surface. Composite membrane fabricated with glycol or glycerol as the additive showed very good chemical stability. (C) 2014 Elsevier B. V. All rights reserved.
