更多
论文成果
Preparation and characterization of poly(phthalazinone ether sulfone ketone) hollow fiber ultrafiltration membranes with excellent thermal stability
点击次数:
论文类型: 期刊论文
发表时间: 2006-09-01
发表刊物: JOURNAL OF MEMBRANE SCIENCE
收录刊物: SCIE、EI、Scopus
卷号: 280
期号: 1-2
页面范围: 957-968
ISSN号: 0376-7388
关键字: hollow fiber; ultrafiltration membrane; morphology; performance; thermal stability
摘要: Hollow fiber ultrafiltration membranes were prepared successfully from poly(phthalazinone ether suffone ketone) (PPESK) with a dry/wet phase inversion technique. Ethylene glycol methyl ether, diethylene glycol (DegOH) and methyl ethyl ketone were used as non-solvent additives and N-methyl-2-pyrrolidone used as a solvent in membrane preparation. The effects of PPESK concentration, the type of additives and the concentration of DegOH in casting solution on the morphology and performance of hollow fiber ultrafiltration membranes were investigated, respectively. The structures of PPESK hollow fiber membranes including the cross-section, the inner/outer edge (details of the cross-sections at the inner/outer edge of the membrane), and the external surface were characterized by scanning electron microscope (SEM). It was found that the membrane performance is consistent and agrees with the membrane morphology. With the increase of PPESK concentration in the casting solution, the viscosity strongly increases and it becomes shear-rate dependent. The morphologies of hollow fiber membranes changed from fingerlike structure to sponge-shape structure, and the properties of ultrafiltration membrane showed that the pure water flux was about 159 L m(-2) h(-1), and PEG 10,000 rejection was above 95% under the operating pressure of 0.1 MPa. PPESK hollow fiber ultrafiltration membranes prepared in this work was also investigated the thermal stability at different operating temperature. As a result, when the temperature of feed solution was raised from 15 to 100 degrees C, the permeation flux increased more than three times without significant change of rejection. (c) 2006 Elsevier B.V. All rights reserved.

蹇锡高

教授   博士生导师   硕士生导师

性别: 男

毕业院校:大连工学院

学位: 硕士

所在单位:化工学院

学科:高分子材料. 高分子化学与物理. 膜科学与技术

联系方式:手机:13904286124

电子邮箱:jian4616@dlut.edu.cn

邮箱 : jian4616@dlut.edu.cn

辽ICP备05001357号 地址:中国·辽宁省大连市甘井子区凌工路2号 邮编:116024
版权所有:大连理工大学
访问量: 手机版 English 大连理工大学 登录

开通时间:..

最后更新时间:..