Indexed by:期刊论文

Date of Publication:2018-05-15

Journal:APPLIED SURFACE SCIENCE

Included Journals:SCIE、EI

Volume:440

Page Number:1091-1100

ISSN No.:0169-4332

Key Words:Cellulose nanocrystal; PVDF; Antifouling; Ultrafiltration membrane

Abstract:Hydrophilic cellulose nanocrystal (CNC) was incorporated into hydrophobic poly(vinylidene fluoride) (PVDF) membrane via phase inversion process to improve membrane antifouling property. The effects of CNC on membrane morphology, hydrophilicity, permeability and antifouling property were investigated in-detail. Results indicated that the introduction of CNC into PVDF membrane enhanced the permeability by optimizing membrane microstructure and improving membrane hydrophilicity. A higher pure water flux of 206.9 L m(-2) h(-1) was achieved for CNC/PVDF membrane at 100 kPa, which was 20 times that of PVDF membrane (9.8 L m(-2) h(-1)). In bovine serum albumin filtration measurements, the permeation flux and flux recovery ratio of CNC/PVDF membrane were increased remarkably, while the irreversible fouling-resistance of CNC/PVDF membrane decreased by 48.8%. These results indicated that the CNC/PVDF membrane possessed superior antifouling property due to the hydrophilicity of CNC that formed a hydration layer on the membrane surface to effectively reduce contaminants adsorption/deposition. (C) 2018 Elsevier B.V. All rights reserved.