点击次数：

论文类型：期刊论文

发表时间：2015-11-02

发表刊物：THIN SOLID FILMS

收录刊物：SCIE、EI

卷号：594

页面范围：147-155

ISSN号：0040-6090

关键字：CrN/TiN superlattice coatings; Deep oscillation magnetron sputtering; Pulsed direct-current magnetron sputtering; Mechanical properties; Tribological properties

摘要：Deep oscillation magnetron sputtering (DOMS) is an alternative high-power pulsed magnetron sputtering technique, which offers virtually arc-free depositions especially for reactive depositions of some insulating coatings under optimized pulsing conditions. CrN/TiN superlattice coatings with a modulated period (Lambda) ranging from 5.7 to 10.2 nm were deposited using a combination of DOMS and pulsed dc magnetron sputtering in a closed field unbalanced magnetron sputtering system. As a. was increased from 5.7 to 10.2 nm, CrN/TiN superlattice coatings with the increased Cr/(Cr + Ti) ratio from 0.177 to 0.496 exhibited a single phase face-centered cubic structure with a strong {111} texture. Correspondingly, the hardness, the H/E* and H-3/E*(2) ratios showed an initial increase, followed by a decrease. The coatings at Lambda = 6.3 nm with the Cr/(Cr + Ti) ratio of 0.294 and fine grain size of about 30 nm showed the highest hardness of 36 GPa, H/E* ratio of 0.093 and H-3/E*(2) ratio of 0.313. It also showed a mild abrasive wear with the lowest friction coefficient and specific wear rate of 0.27 and 0.5x10(-6) mm(3) N-1 m(-1), respectively. With increasing., the friction coefficient and specific wear rate decreased and then increased. The dominant wear mechanism changed from oxidative wear to mild abrasive wear, and then to severe oxidative wear. The changes of H, H/E* and H-3/E*(2) ratios and adhesion of CrN/TiN superlattice coatings resulted in variation of tribological properties and wear mechanism. (C) 2015 Elsevier B.V. All rights reserved.