location: Current position: Home >> Scientific Research >> Paper Publications

Start-up of the anammox process from the conventional activated sludge in a hybrid bioreactor

Hits:

Indexed by:期刊论文

Date of Publication:2012-07-01

Journal:JOURNAL OF ENVIRONMENTAL SCIENCES

Included Journals:SCIE、EI、PubMed、ISTIC

Volume:24

Issue:6

Page Number:1083-1090

ISSN No.:1001-0742

Key Words:anammox; hybrid bioreactor; fluorescence in situ hybridization; 16S rRNA gene clone library

Abstract:The anaerobic ammonium oxidation (anammox) process was successfully started up from conventional activated sludge using a hybrid bioreactor within 2 months. The average removal efficiencies of ammonia and nitrite were both over 80%, and the maximum total nitrogen removal rate of 1.85 kg(1.)N/(m(3).day) was obtained on day 362 with the initial sludge concentration of 0.7 g mixed liquor suspended solids (MLSS)/L. Scanning electron microscope (SEM) observation of the granular sludge in the hybrid reactor clearly showed a high degree of compactness and cell sphericity, and the cell size was quite uniform. Transmission electron microscope photos showed that cells were round or oval, the cellular diameter was 0.6-1.0 mu m, and the percentage of the anammoxosome compartment was 51%-85% of the whole cell volume. Fluorescence in situ hybridization analysis (FISH) indicated that anammox bacteria became the dominant population in the community (accounting for more than 51% of total bacteria on day 250). Seven planctomycete 16S rRNA gene sequences were present in the 16S rRNA gene clone library generated from the biomass and affiliated to Candidatus Kuenenia stuttgartiensis and Candidatus Brocadia sp., a new anammox species. In addition, the average effluent suspended solid (MLSS) concentrations of outlets I (above the non-woven carrier) and II (below the non-woven carrier) were 0.0009 and 0.0035 g/L, respectively. This showed that the non-woven carrier could catch the biomass effectively, which increased biomass and improved the nitrogen removal rate in the reactor.

Pre One:Cu(Ⅱ)印迹壳聚糖交联膜的表征及其吸附热力学特性

Next One:Nutrients removal from secondary effluent by using different constructed wetland systems