SMCBT9ahpHxxwscDSpp4KUz5hDJEpzvmQYjbSOaInbJfb8lpm3F66sak1lcg
Current position: Home >> Scientific Research >> Paper Publications

Premixed methane/air flame propagating in an obstructed chamber with different BRs and spatial configurations

Release Time:2019-03-12  Hits:

Indexed by: Journal Article

Date of Publication: 2017-05-01

Journal: JOURNAL OF LOSS PREVENTION IN THE PROCESS INDUSTRIES

Included Journals: EI、SCIE

Volume: 47

Page Number: 66-71

ISSN: 0950-4230

Key Words: Obstacle BR; Spatial configurations; Flame tip speed; Deflagration overpressure; Second flame acceleration

Abstract: The effects of obstacle blockage ratio (BR) and spatial configurations on premixed methane/air flame propagation are experimentally investigated by the high-speed video photography and pressure transducer. The results demonstrate that the flame shape changes, flame tip speed and deflagration overpressure in the initial stage are not affected by the obstacles with different BRs and spatial configurations. After the moving flame feels the obstacle, flame tip speed and overpressure increase significantly with increasing obstacle BR for center-installed obstacle. The first peak value of flame tip speed with bottom installed obstacle is slightly larger than that with center-installed obstacle. Two-peak structure is observed in the curves of flame tip speed, and overpressure variation depends strongly on the second flame acceleration, which also explains the fact that deflagration overpressure with bottom-installed obstacle is smaller than that with center-installed obstacle with time ranging from t = 36 m to t = 90 m. (C) 2017 Elsevier Ltd. All rights reserved.

Prev One:Experimental investigation of flame propagation characteristics in the in-line crimped-ribbon flame arrester

Next One:波纹管道阻火器内火焰传播的实验与数值模拟研究