点击次数：

论文类型：会议论文

发表时间：2017-09-17

发表刊物：International Conference on the Technology of Plasticity, ICTP 2017

收录刊物：EI、Scopus

卷号：207

页面范围：532-537

摘要：Large continuous casting billet always contain void defects which may adversely affect the mechanical properties and safe performance of final products. The void must be completely eliminated during hot forging process. In this paper, different types of void defects in large billet are showed and analyzed. It is found that the voids have different geometry, orientations and positions. Using finite element (FE) software DEFORM 3D, a FE model was developed to investigate the void closure in large continuous casting billet during multi-pass stretching process. The wide die heavy blow forging (WHF) method which has been proved to be an effective method to eliminate void defects was adapted during the stretching process. Then, the stretching processes of various sizes of billets which contained different kinds of void defects were simulated. The closure processes of different kinds of void defects were obtained. The critical forging ratio for large billets from   500mm to   1000mm was obtained as 2.40. In addition, the void closure evaluation index is analyzed, and the critical value for the closure of all voids is 0.87. The work in this paper is verified by actual production, which illustrates that the simulation results and the proposed criterion in this research are reliable.