点击次数：

论文类型：期刊论文

发表时间：2020-03-01

发表刊物：COMPOSITE STRUCTURES

收录刊物：EI、SCIE

卷号：235

ISSN号：0263-8223

关键字：Ti/CFPR stacks; Burr; Delamination; Drilling; Step drill

摘要：The Ti/CFRP stacks are widely used in the field of aerospace since their excellent properties. However, it is quite a challenge work to obtain quality holes in one-shot drilling due to the tremendous differences in material properties of Ti and CFRP. In this paper, a novel step drill structure which could reduce the delamination and burr by controlling step diameters ratio is proposed. Considering the geometric structure of step drill and the properties of the materials, the cuffing loads prediction model and three simplified drill-exit damage model are established in order for confirming critical condition of the defect. Consequently, the relationship between the burr height, delamination length and the diameter of step-drill bit are clarified. Then a novel step drill with variation step ratio is designed. And geometrical analysis proved that it could effectively improve the quality of drill-exit. In addition, comparative experiments were carried out, the result showed that the proposed step drill structure can effectively reduce the damages such as the burr and delamination as expected.