|
个人信息Personal Information
教授
博士生导师
硕士生导师
主要任职：校长、党委副书记
性别：男
毕业院校：大连理工大学
学位：博士
所在单位：机械工程学院
电子邮箱：jzyxy@dlut.edu.cn
扫描关注
- [201]卢晓红, 贾振元, 王华, Feng, Yixuan, Liang, Steven Y..The effect of cutting parameters on micro-hardness and the prediction of Vickers hardness based...[J],MEASUREMENT,2022,140:56-62
- [202]王永青, 贾振元.The influence of incident angle on distance detection accuracy of point laser probe with charge-c...[J],OPTICAL ENGINEERING,2022,51(8):1-6
- [203]陈晨, 贾振元, 王福吉, 牛斌, 杨帆, Bi, Guangjian.The effect of interaction between Titanium alloy and CFRP on the interface damage in cutting Ti/C...[A],21st International Conference on Composite Materials, ICCM 2017,2022,2017-August
- [204]卢晓红, Wang, FuRui, 贾振元, Liang, Steven Y..The flank wear prediction in micro-milling Inconel 718[J],INDUSTRIAL LUBRICATION AND TRIBOLOGY,2022,70(8):1374-1380
- [205]Zhou, M, 贾振元, 杨连文.The optimization study of parameters on EDM machining micro and small holes[A],5th International Conference on Frontiers of Design and Manufacturing (ICFDM 2002),2022,461-467
- [206]贾振元, 卢晓红, Liu, Dixin.The research on lean rework and balancing of the cylinder liner production line[A],6th World Congress on Intelligent Control and Automation,2022,2:6680-+
- [207]贾振元, Su, Youliang, 牛斌, 张博宇, 王福吉.The interaction between the cutting force and induced sub-surface damage in machining of carbon...[J],JOURNAL OF REINFORCED PLASTICS AND COMPOSITES,2022,35(9):712-726
- [208]卢晓红, 贾振元, 王鑫鑫, Li, Guangjun, 任宗金.Three-dimensional dynamic cutting forces prediction model during micro-milling nickel-based sup...[J],INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2022,81(9-12):2067-2086
- [209]刘阔, 李特, Li, Tiejun, 刘昱, 王永青, 贾振元.Thermal behavior analysis of horizontal CNC lathe spindle and compensation for radial thermal d...[J],INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2022,95(1-4):1293-1301
- [210]张军, Tian, Yu, 任宗金, Wang, Xinlei, You, Chuancun, 贾振元.Thermal Force Uncertainty of Piezoelectric Dynamometer[J],IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT,2022,68(12):4723-4735
- [211]贾振元, Zhao, Xiao-xuan, 马建伟, Chen, Si-yu, Qin, Feng-ze, Liu, Zhao.Toolpath generation in sub-regional processing with constraint of constant scallop-height at bo...[J],PRECISION ENGINEERING JOURNAL OF THE AMERICAN SOCIETY FOR PRECISION ENGINEE,2022,55:217-230
- [212]Gao, Yuan-yuan, 马建伟, 贾振元, 王福吉, 司立坤, Song, De-ning.Tool path planning and machining deformation compensation in high-speed milling for difficult-t...[J],INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2022,84(9-12):1757-1767
- [213]马建伟, Song, De-ning, 贾振元, Hu, Guo-qing, Su, Wei-wei, 司立坤.Tool-path planning with constraint of cutting force fluctuation for curved surface machining[J],PRECISION ENGINEERING JOURNAL OF THE AMERICAN SOCIETY FOR PRECISION ENGINEE,2022,51:614-624
- [214]马建伟, 李冠林, Lu, Xiao, 贾振元, Qin, Feng-Ze, Qu, Zi-Wen.Toolpath Regeneration in Subregional Contour-Parallel Processing Based on Isoscallop Method[J],IEEE-ASME TRANSACTIONS ON MECHATRONICS,2022,26(2):730-740
- [215]卢晓红, 贾振元.Tool Point Frequency Response Prediction for Micro-milling by RCSA[J],JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING TRANSACTIONS OF THE ASME,2022,139(7):1-13
- [216]卢晓红, 贾振元, Zhang Haixing, Liu Shengqian, Feng Yixuan, Liang, Steven Y..Tool Point Frequency Response Prediction for Micromilling by Receptance Coupling Substructure A...[J],JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING TRANSACTIONS OF THE ASME,2022,139(7)
- [217]卢晓红, 贾振元, 王华, 司立坤, 刘永云, Wu, Wenyi.Tool wear appearance and failure mechanism of coated carbide tools in micro-milling of Inconel ...[J],INDUSTRIAL LUBRICATION AND TRIBOLOGY,2022,68(2):267-277
- [218]贾振元, 陈晨, 王福吉, 马建伟, 杨帆.Three-dimensional oblique cutting model for sub-surface damage analysis in CFRP/Ti stack compos...[J],INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2022,96(1-4):643-655
- [219]Xing, Qin, 张军, 钱敏, 贾振元, Sun, Bao-yuan.Thrust stand for low-thrust liquid pulsed rocket engines[J],REVIEW OF SCIENTIFIC INSTRUMENTS,2022,81(9):095102
- [220]Xia, Fafeng, Wu, Menghua, 贾振元, Li, Zhi.Ultrasonic-electrodeposited nano Ni-AlN composite layers and characterization[A],International Technology and Innovation Conference 2006, ITIC 2006,2022,524:35-38