|
个人信息Personal Information
教授
博士生导师
硕士生导师
主要任职：校长、党委副书记
性别：男
毕业院校：大连理工大学
学位：博士
所在单位：机械工程学院
电子邮箱：jzyxy@dlut.edu.cn
扫描关注
- [261]Jia ZhenYuan, Song DeNing, Ma JianWei, Zhao XiaoXuan, Su WeiWei, Ma, JW (reprint author), Dalian Univ Technol, Sch Mech Engn, Minist Educ, Key Lab Precis & Nontradit Machining Technol, Dalian 116024, Peoples R China..Adaptive estimation and nonlinear variable gain compensation of the contouring error for precis...[J],SCIENCE CHINA-TECHNOLOGICAL SCIENCES,2017,60(10):1494-+
- [262]王福吉, 成德, 贾振元, 付饶.冷却空气流向对CFRP制孔刀具磨损及孔质量影响的研究[A],2017
- [263]Ma, Jian-wei, Jia, Zhen-yuan, Song, De-ning, Su, Wei-wei, Hu, Guo-qing, Si, Li-kun, JW (reprint author), Dalian Univ Technol, Sch Mech Engn, Key Lab Precis & Nontradit Machining Technol, Minist Educ, Dalian 116024, Peoples R China..High-adaptable prediction method of flat-end milling force based on material properties for dif...[J],INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2017,92(1-4):1493-1506
- [264]Wang, Fu-ji, Yin, Jun-wei, Ma, Jian-wei, Jia, Zhen-yuan, Yang, Fan, Niu, Bin, JW (reprint author), Dalian Univ Technol, Sch Mech Engn, Minist Educ, Key Lab Precis & Nontradit Machining Technol, Dalian 116024, Peoples R China..Effects of cutting edge radius and fiber cutting angle on the cutting-induced surface damage in...[J],INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2017,91(9-12):3107-3120
- [265]Lu, Xiaohong, Wang, Furui, Jia, Zhenyuan, Si, Likun, Zhang, Chi, Liang, Steven Y., ZY (reprint author), Dalian Univ Technol, Sch Mech Engn, Key Lab Precis & Nontradit Machining Technol, Minist Educ, 2 Linggong Rd, Dalian 116024, Peoples R China..A modified analytical cutting force prediction model under the tool flank wear effect in micro-...[J],INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2017,91(9-12):3709-3716
- [266]丁立超, 刘巍, 高鹏, 贾振元.应用显微视觉的跨尺度几何参数测量方法[J],机械设计与制造,2017,7:9-13
- [267]Jia, Zhenyuan, Su, Youliang, Niu, Bin, Bai, Yu, Bi, Guangjian, B (reprint author), Dalian Univ Technol, Key Lab Precis & Nontradit Machining Technol, Minist Educ, Dalian, Peoples R China..Deterioration of polycrystalline diamond tools in milling of carbon-fiber-reinforced plastic[J],JOURNAL OF COMPOSITE MATERIALS,2017,51(16):2277-2290
- [268]Ma, Jian-wei, Liu, Zhen, Jia, Zhen-yuan, Song, De-ning, Gao, Yuan-yuan, Si, Li-kun, JW (reprint author), Dalian Univ Technol, Sch Mech Engn, Key Lab Precis & Nontradit Machining Technol, Minist Educ, Dalian 116024, Peoples R China..Stability recognition for high-speed milling of TC4 thin-walled parts with curved surface[J],INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2017,91(5-8):2819-2829
- [269]Lu Xiaohong, Jia Zhenyuan, Zhang Haixing, Liu Shengqian, Feng Yixuan, Liang, Steven Y., Jia, ZY (reprint author), Dalian Univ Technol, Minist Educ, Key Lab Precis & Nontradit Machining Technol, 2 LingGong Rd, Dalian 116026, Liaoning, Peoples R China..Tool Point Frequency Response Prediction for Micromilling by Receptance Coupling Substructure A...[J],JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME,2017,139(7)
- [270]赵海洋, 张洋, 兰志广, 李汝鹏, 刘巍, 邢宏文, 肖睿恒, 贾振元.基于点云三维重构的配合面装配间隙分析方法研究[J],计测技术,2017,37(3):20-23
- [271]Lu, Xiaohong, Zhang, Haixing, Jia, Zhenyuan, Feng, Yixuan, Liang, Steven Y..A New Method for the Prediction of Micro-milling Tool Breakage[A],2017,1
- [272]Lu, Xiaohong, Wang, Hua, Jia, Zhenyuan, Si, Likun, Liang, Steven Y..Effects of tool nose corner radius & main cutting-edge radius on cutting temperature in micro-mil...[A],2017,1
- [273]Bai, Y., Jia, Z. Y., Wang, F. J., Fu, R., Guo, H. B., Cheng, D., Zhang, B. Y..Influence of drill helical direction on exit damage development in drilling carbon fiber reinfo...[A],2017,213(1)
- [274]Zhang, Yang, Yang, Fan, Liu, Wei, Zhiyuan, Zhao, Haiyang, Lan, Zhiguang, Gao, Peng, Jia, Zhenyuan.An Improved Measurement Method for Large Aviation Part based on Spatial Constraint Calibration ...[A],2017,10420
- [275]赵凯, 贾振元.工程塑料复杂曲面零件表层跨尺度金属图案精密制造技术[J],机械工程学报,2017,53(7):93
- [276]Jia, Zhen-yuan, Song, De-ning, Ma, Jian-wei, Hu, Guo-qing, Su, Wei-wei, JW (reprint author), Dalian Univ Technol, Sch Mech Engn, Key Lab Precis & Nontradit Machining Technol Mini, Dalian 116024, Peoples R China..A NURBS interpolator with constant speed at feedrate-sensitive regions under drive and contour-...[J],INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE,2017,116:1-17
- [277]刘巍, 高鹏, 张洋, 杨帆, 李晓东, 兰志广, 贾振元, 高航.面向大型零部件的三维形面高精度测量方法[J],红外与激光工程,2017,46(3):244-252
- [278]Su, Youliang, Jia, Zhenyuan, Niu, Bin, Bi, Guangjian, B (reprint author), Dalian Univ Technol, Sch Mech Engn, Minist Educ, Key Lab Precis & Nontradit Machining Technol, Dalian 116024, Peoples R China..Size effect of depth of cut on chip formation mechanism in machining of CFRP[J],COMPOSITE STRUCTURES,2017,164:316-327
- [279]Song, De-ning, Ma, Jian-wei, Jia, Zhen-yuan, Gao, Yuan-yuan, JW (reprint author), Dalian Univ Technol, Sch Mech Engn, Key Lab Precis & Nontradit Machining Technol, Minist Educ, Dalian 116024, Peoples R China..Estimation and compensation for continuous-path running trajectory error in high-feed-speed mac...[J],INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2017,89(5-8):1495-1508
- [280]Liu Wei, Ma Xin, Jia Zhenyuan, Lu Wenbo, Wang Zhengqu, Chen Ling, Lu Jiwen, Liu Weixiao, Liu, W (reprint author), Dalian Univ Technol, Minist Educ, Key Lab Precis & Nontradit Machining Technol, Dalian 116024, Peoples R China..An experimental system for release simulation of internal stores in a supersonic wind tunnel[J],CHINESE JOURNAL OF AERONAUTICS,2017,30(1):186-195