|
个人信息Personal Information
教授
博士生导师
硕士生导师
主要任职：校长、党委副书记
性别：男
毕业院校：大连理工大学
学位：博士
所在单位：机械工程学院
电子邮箱：jzyxy@dlut.edu.cn
扫描关注
- [321]贾振元, 马建伟, Song, De-ning, 王福吉, 刘巍.A review of contouring-error reduction method in multi-axis CNC machining[J],INTERNATIONAL JOURNAL OF MACHINE TOOLS MANUFACTURE,2022,125:34-54
- [322]Song, De-ning, 贾振元, 马建伟, Zhang, Ning, 司立坤.A precise direct parametric interpolation method for NURBS-toolpath generation[J],International Journal of Industrial and Systems Engineering,2022,31(2):278-286
- [323]贾振元, Ji, T, 郭东明, 卞桂红.A precision grinding technique for radome inner surfaces[J],KEY ENGINEERING MATERIALS,2022,257-258:177-182
- [324]刘巍, 贾振元, Zou, Shangbo, Zhang, Lingxuan.A real-time predictive control method of discharge state for micro-EDM based on calamities grey...[J],INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2022,72(1-4,SI):135-144
- [325]贾振元, Zheng, Xinyi, 王福吉, 刘巍, 周明.A progressive mapping method for classifying the discharging states in micro-electrical dischar...[J],INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2022,56(1-4):197-204
- [326]Zhang, Lingxuan, 贾振元, 刘巍, Wei, Li.A study of electrode compensation model improvement in micro-electrical discharge machining mil...[J],PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B JOURNAL OF EN,2022,226(B5):789-802
- [327]刘巍, Wang, Liang, 贾振元, Fan, Chaonan, Yang, Jinghao, Xu, Pengtao, Lingli, 刘扬.A suppression method of image noise for cylindrical objects based on vision sensors[J],SENSORS AND ACTUATORS A PHYSICAL,2022,247:403-414
- [328]Gao, Yifei, 任宗金, 贾振元, 刘巍.A study on the dynamic six-component force measurement with wind loads[J],PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C JOURNAL OF ME,2022,227(11):2456-2466
- [329]贾振元, 刘扬, 刘巍, 张弛, Yang, Jinghao, Wang, Lingli, 赵凯.A spectrum selection method based on SNR for the machine vision measurement of large hot forgin...[J],OPTIK,2022,126(24):5527-5533
- [330]孙玉文, 徐金亭, 郭东明, 贾振元.A unified localization approach for machining allowance optimization of complex curved surfaces[J],PRECISION ENGINEERING JOURNAL OF THE AMERICAN SOCIETY FOR PRECISION ENGINEE,2022,33(4):516-523
- [331]刘巍, Li, Xiao, 贾振元, Yan, Hongyue, Ma, Xin.A three-dimensional triangular vision-based contouring error detection system and method for ma...[J],PRECISION ENGINEERING JOURNAL OF THE AMERICAN SOCIETY FOR PRECISION ENGINEE,2022,50:85-98
- [332]Liu, Wei, Di, Hongtu, Zhang, Yang, Lu, Yongkang, Cheng, Xikang, Cui, Jiacheng, 贾振元.Automatic Detection and Segmentation of Laser Stripes for Industrial Measurement[J],IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT,2022,69(7):4507-4515
- [333]Zhang, Lingxuan, 贾振元, 刘巍, Li, Anchao.A two-stage servo feed controller of micro-EDM based on interval type-2 fuzzy logic[J],INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2022,59(5-8):633-645
- [334]杨凤华, 刘巍, 张洋, Gao P., 贾振元.Binocular camera calibration method combined with the four collinear constraints[J],光学学报,2022,36(7)
- [335]刘巍, Li, Xiao, 贾振元, 李慧, Ma, Xin, Yan, Hongyue, 马建伟.Binocular-vision-based error detection system and identification method for PIGEs of rotary axi...[J],PRECISION ENGINEERING JOURNAL OF THE AMERICAN SOCIETY FOR PRECISION ENGINEE,2022,51:208-222
- [336]孙玉文, 郭东明, 贾振元, Liu, WJ.B-spline surface reconstruction and direct slicing from point clouds[J],INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2022,27(9-10):918-924
- [337]Zhang, Zhiyuan, 刘巍, 张洋, Lu, Yongkang, Di, Hongtu, Ye, Fan, 贾振元.Calibration Method for Large Field of View Image Matching Parameters Based on Non-Metric Correcti...[J],光学学报,2022,38(8)
- [338]刘巍, 贾振元, 李强.Calibration method on machine for multi-axis heavy force sensor[J],Sensors and Transducers,2022,142(7):130-142
- [339]赵凯, 贾振元, 刘巍, 马建伟, Ding, Lichao.Burr Control for Removal of Metal Coating from Plastics Substrate by Micro-Milling[J],MATERIALS AND MANUFACTURING PROCESSES,2022,31(5):641-647
- [340]Ning F., 王福吉, 贾振元, 马建伟.Chip morphology and surface roughness in high-speed milling of nickel-based superalloy Inconel 71...[J],International Journal of Machining and Machinability of Materials,2022,15(3-4):285-299