|
个人信息Personal Information
教授
博士生导师
硕士生导师
主要任职：校长、党委副书记
性别：男
毕业院校：大连理工大学
学位：博士
所在单位：机械工程学院
电子邮箱：jzyxy@dlut.edu.cn
扫描关注
- [801]Lu Xiaohong, Jia Zhenyuan, Zhang Haixing, Liu Shengqian, Feng Yixuan, Liang, Steven Y., Jia, ZY (reprint author), Dalian Univ Technol, Minist Educ, Key Lab Precis & Nontradit Machining Technol, 2 LingGong Rd, Dalian 116026, Liaoning, Peoples R China..Tool Point Frequency Response Prediction for Micromilling by Receptance Coupling Substructure A...[J],JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME,2017,139(7)
- [802]赵海洋, 张洋, 兰志广, 李汝鹏, 刘巍, 邢宏文, 肖睿恒, 贾振元.基于点云三维重构的配合面装配间隙分析方法研究[J],计测技术,2017,37(3):20-23
- [803]Lu, Xiaohong, Zhang, Haixing, Jia, Zhenyuan, Feng, Yixuan, Liang, Steven Y..A New Method for the Prediction of Micro-milling Tool Breakage[A],2017,1
- [804]Lu, Xiaohong, Wang, Hua, Jia, Zhenyuan, Si, Likun, Liang, Steven Y..Effects of tool nose corner radius & main cutting-edge radius on cutting temperature in micro-mil...[A],2017,1
- [805]Bai, Y., Jia, Z. Y., Wang, F. J., Fu, R., Guo, H. B., Cheng, D., Zhang, B. Y..Influence of drill helical direction on exit damage development in drilling carbon fiber reinfo...[A],2017,213(1)
- [806]Zhang, Yang, Yang, Fan, Liu, Wei, Zhiyuan, Zhao, Haiyang, Lan, Zhiguang, Gao, Peng, Jia, Zhenyuan.An Improved Measurement Method for Large Aviation Part based on Spatial Constraint Calibration ...[A],2017,10420
- [807]赵凯, 贾振元.工程塑料复杂曲面零件表层跨尺度金属图案精密制造技术[J],机械工程学报,2017,53(7):93
- [808]Jia, Zhen-yuan, Song, De-ning, Ma, Jian-wei, Hu, Guo-qing, Su, Wei-wei, JW (reprint author), Dalian Univ Technol, Sch Mech Engn, Key Lab Precis & Nontradit Machining Technol Mini, Dalian 116024, Peoples R China..A NURBS interpolator with constant speed at feedrate-sensitive regions under drive and contour-...[J],INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE,2017,116:1-17
- [809]刘巍, 高鹏, 张洋, 杨帆, 李晓东, 兰志广, 贾振元, 高航.面向大型零部件的三维形面高精度测量方法[J],红外与激光工程,2017,46(3):244-252
- [810]Su, Youliang, Jia, Zhenyuan, Niu, Bin, Bi, Guangjian, B (reprint author), Dalian Univ Technol, Sch Mech Engn, Minist Educ, Key Lab Precis & Nontradit Machining Technol, Dalian 116024, Peoples R China..Size effect of depth of cut on chip formation mechanism in machining of CFRP[J],COMPOSITE STRUCTURES,2017,164:316-327
- [811]Song, De-ning, Ma, Jian-wei, Jia, Zhen-yuan, Gao, Yuan-yuan, JW (reprint author), Dalian Univ Technol, Sch Mech Engn, Key Lab Precis & Nontradit Machining Technol, Minist Educ, Dalian 116024, Peoples R China..Estimation and compensation for continuous-path running trajectory error in high-feed-speed mac...[J],INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2017,89(5-8):1495-1508
- [812]Liu Wei, Ma Xin, Jia Zhenyuan, Lu Wenbo, Wang Zhengqu, Chen Ling, Lu Jiwen, Liu Weixiao, Liu, W (reprint author), Dalian Univ Technol, Minist Educ, Key Lab Precis & Nontradit Machining Technol, Dalian 116024, Peoples R China..An experimental system for release simulation of internal stores in a supersonic wind tunnel[J],CHINESE JOURNAL OF AERONAUTICS,2017,30(1):186-195
- [813]郭东明, 贾振元, 杨睿, 钱卫.大型风洞气动弹性试验模型/支撑制造、感知与控制的科学问题[J],中国科学基金,2017,31(5):428-431
- [814]贾振元, 王福吉, 牛斌.The effect of interaction between titanium alloy and CFRP on the interface damage in cutting Ti/C...[A],2017
- [815]王福吉, 贾振元.Numerical simulation of drilling carbon fiber reinforced plastics in the macroscopic and microsco...[A],2017
- [816]Lu, Xiaohong, Wang, Hua, Jia, Zhenyuan, Si, Likun, Liang, Steven Y..Effects of Tool Nose Corner Radius and Main Cutting-edge Radius on Cutting Temperature in Micro...[A],2017
- [817]Wei Liu, Ma Xin, Liang Bing, Yang Zaihua, Yi Wangmin, Long Changyu, Jia Zhenyuan.A monocular vision 3D measurement method based on rotating lens[A],2017,1717-1721
- [818]王福吉, 马建伟, 贾振元, 牛斌.Effects of cutting edge radius and fiber cutting angle on the cutting-induced surface damage form...[J],The International Journal of Advanced Manufacturing Technology,2017,91(9-12):3107-3120
- [819]卢晓红, 贾振元.Tool Point Frequency Response Prediction for Micro-milling by RCSA[J],JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME,2017,139(7):1-13
- [820]Jia Zhenyuan, Gao Yuanyuan, Ma Jianwei, Song Dening, Ma, JW (reprint author), Dalian Univ Technol, Minist Educ, Key Lab Precis & Nontradit Machining Technol, Dalian 116024, Peoples R China..Pre-compensation for continuous-path running trajectory error in high-speed machining of parts ...[J],CHINESE JOURNAL OF MECHANICAL ENGINEERING,2017,30(1):37-45