陈军

个人信息Personal Information

副教授

硕士生导师

性别:男

出生日期:1965-06-03

毕业院校:大连理工大学

学位:博士

所在单位:材料科学与工程学院

学科:材料无损检测与评价

办公地点:大连理工大学材料馆230房间

联系方式:0411-84707117

电子邮箱:chenjun@dlut.edu.cn

扫描关注

论文成果

当前位置: 中文主页 >> 科学研究 >> 论文成果

基于ANSYS仿真分析的管材涡流检测频率优化研究

点击次数:

发表时间:2014-01-01

发表刊物:失效分析与预防

所属单位:材料科学与工程学院

期号:5

页面范围:257-261

ISSN号:1673-6214

摘要:In traditional eddy current testing, the optimal excitation frequency is difficult to determine and deviations are usually encountered during practical examination. To solve this problem, an inner coil and through-type eddy current testing model for a 1Cr18Ni9Ti stainless steel tube with 19 mm diameter and 2 mm thickness was established using the common finite element software ANSYS. According to the characteristic of differential probe, the real and imaginary part of the electric current, IREAL and IIMAG, and the impedance difference Z of the coil with different distance from defect were calculated and then the simulation signal of the artificial defect were obtained. After a careful comparison between the amplitude and phase of the signal of different frequencies, the optimal testing frequency of through-type eddy current was determined as 50 kHz.

备注:新增回溯数据