Hits:

Indexed by:期刊论文

Date of Publication:2017-06-01

Journal:JOURNAL OF MANUFACTURING PROCESSES

Included Journals:SCIE、EI、Scopus

Volume:27

Page Number:108-113

ISSN No.:1526-6125

Key Words:Submerged; Gate; Casting; Filling; Inclusion

Abstract:The submerged gate filling processes were investigated through the use of particle image velocimetry (PIV) measurements, numerical simulation and castings production. The results showed that the submerged gate filling can improve the mold filling conditions, which may reduce the occurrence of inclusion defects during casting production. The liquid free surface in the mold rose slowly and smoothly during the filling process, which could reduce the occurrence of oxide film inclusion defects. The flow velocity decreased from the gate to the mold, which may reduce the severity of the liquid impingement that causes sand wash defects. The liquid flow inside the mold, with the exception of the flow path region, was primarily quiescent and the distance from the submerged gate to the free surface was relatively small. Therefore, low density slag in the liquid could be carried to the liquid free surface by the fluid flow and by the slag's buoyancy. (C) 2017 The Society of Manufacturing Engineers. Published by Elsevier Ltd. All rights reserved.