location: Current position: Home >> Scientific Research >> Paper Publications

Simultaneous photocatalytic removal of ammonium and nitrite in water using Ce3+-Ag+ modified TiO2

Hits:

Indexed by:期刊论文

Date of Publication:2009-06-02

Journal:Mini Symposium on Advanced Technologies for Environments Remediation

Included Journals:SCIE、EI、CPCI-S

Volume:67

Issue:2,SI

Page Number:244-248

ISSN No.:1383-5866

Key Words:TiO2 photo-catalyst; Metal ion co-loading; Nitrogen removal

Abstract:Simultaneous photocatalytic removal of both ammonium and nitrite from water via coupled oxidation and reduction for N-2 formation was studied, using TiO2 loaded with different ratios of Ce3+ and Ag+. The catalysts were prepared using a sol-gel method with PEG or P123 as soft template. The catalysts with the highest activity (cerium and silver loading both at 0.1%) in N removal were characterized by TEM, XRD and UV-vis spectra. The crystalline TiO2 was mainly anatase type, its size averaged at 8.8-9.6 nm. Contents of Ce and Ag and ratios of ammonium to nitrite (NH4-N/NO2--N) in the reaction solution affected either the catalyst activity or the nitrogen removal efficiency. The best removal rates were 69.9% NH4+-N, simultaneously 59.9% NO2--N, and 64.9% TN (total nitrogen) in annular reactor, after 2 h UV (254 nm, 20 W) irradiation when ratio of NH4-N/NO2--N was 1. Using solar light, the same solution after 2 h reaction using the same Ce and Ag co-modified TiO2, removal of NH4-N, NO2-N and TN was 44.8%, 45.3% and 45.1% respectively using a tubular reactor. (c) 2009 Elsevier B.V. All rights reserved.

Pre One:回收与回用展——双膜法处理化纤厂PTA废水研究

Next One:Fe~0/TiO_2光催化降解氯代苯酚的研究