点击次数：

论文类型：期刊论文

发表时间：2021-01-13

发表刊物：ENGINEERING FRACTURE MECHANICS

卷号：75

期号：5

页面范围：961-985

ISSN号：0013-7944

关键字：pullout; anchor; mortar; concrete; anchorage; debonding crack

摘要：Theoretical studies on pullout of an anchor from an anchor-adhesive/mortar-concrete anchorage system have been carried out with the wide application of this anchorage system in civil engineering. Most of them focused on one interfacial debonding crack propagation from the loading end similar to the theoretical method on fiber pullout from matrix, or adopting a uniform interfacial shear stress model to calculate the tensile capacity of the anchor but with a limitary embedment length. Moreover, shear stresses were generally assumed uniformly along the thickness of the adhesive/mortar layer. Actually, the distributions of the shear stresses would be varied as both the thickness of the adhesive/mortar layer and the embedment length increase. Taking into account of this variation, the present study addressed the pullout of an anchor from an anchor-mortar-concrete anchorage system with two different boundary conditions for various embedment lengths analytically combining with the compatibility conditions and a simplified shear stress-slip relationship at the anchor-mortar interface. In the proposed analytical model, the variation of the shear stresses along the thickness of the mortar was gained. Additionally, the distributions of the tensile stresses in the anchor and the interfacial shear stresses along the embedment length were obtained under different loading conditions. After interfacial debonding, the sequences and probabilities of two interfacial debonding cracks developing from both ends of the system were analyzed according to the boundary conditions and the axial rigidities of both the anchor and concrete. Besides, the pullout load was expressed as a function of one or two debonding crack lengths. Then the maximum load P-max was gained correspondingly, as well as the critical crack lengths, by using the theories of extremum. Results show that the obtained solutions consist with the previous work from other literature if the elastic modulus of concrete is assumed to be infinite and the anchor-mortar interface is thought as rigid before debonding. Subsequently, several fundamental structural and interfacial parameters were introduced to study their influences on the calculated results using the proposed model, such as the critical crack lengths, the initial cracking load P-ini and the maximum load P-max. It was found that P-max increases linearly with the embedment length L, however, P-ini is irrelevant to L if L is very long. P-max increases monotonously with the thickness t of the mortar layer if the concrete layer keeps a constant thickness b, however, there appears a peak value in the curve of P-max varying with t if the sum of b and t is invariable. Moreover, the difference between the values of P-max under the two boundary conditions is marginal. (c) 2007 Elsevier Ltd. All rights reserved.