|
个人信息Personal Information
教授
博士生导师
硕士生导师
性别：男
毕业院校：大连理工大学
学位：博士
所在单位：机械工程学院
办公地点：机械学院（知方楼）7118室
联系方式：84708415
电子邮箱：zhangj@dlut.edu.cn
扫描关注
- [41]Liu, H. B., Hou, B., Zhang, J., Wang, Y. Q..Improving Machining Accuracy of Thin-Wall Parts Using the Information-Localizing Technology[A],2015,9245:701-709
- [42]刘海波, 张军, 王永青.Improving machining accuracy of thin-wall structures using the information-localizing technology[A],2015,701-709
- [43]Song M., Ying L., Liu C., Wang M., Yu C., Zhang J..Experimental study on WEDM machining of PCD and PCBN compacts[J],Key Engineering Materials,2014,645:52-57
- [44]任宗金, 张军, 贾振元.Design and Calibration of a Cutting Force Dynamometer[A],2014,945:2191-2194
- [45]张军, 钱敏, 康仁科, 任宗金.Development of piezoelectric three-dimensional dynamometer for φ300mm wafer grinder[A],2014,945:2017-2020
- [46]Zhang J., Wang W., Qian M., Kang R., Ren Z..Development of piezoelectric three-dimensional dynamometer for 300mm wafer grinder[A],2014,945-949:2017-2020
- [47]Gao S., Ren Z., Zhang J., Shang Y., Gao Y., Zhang, J., Key Laboratory for Precision, Non-traditional Machining Technology of Ministry of Education, Dalian University of Technology, 116024, China, email: jun__zh@163.com.Research on dynamic calibration of piezo-two-dimensional force sensor[J],Sensors and Transducers,2013,155(8):34-38
- [48]Ren Z., Jia Z., Zhang J., Gao S., Shang Y., Key Laboratory for Precision, Non-traditional Machining Technology of Ministry of Education, Dalian University of Technology, 116024, China.Study on a method of dynamic response function for the piezoelectric measurement system[J],Sensors and Transducers,2013,153(6):111-117
- [49]Ren Z., Jia Z., Zhang J., Shang Y., Gao S., Key Laboratory for Precision, Non-traditional Machining Technology of Ministry of Education, Dalian University of Technology, 116024, China.Research on the dynamic error and acceleration compensation for the piezoelectric sensor[J],Sensors and Transducers,2013,153(6):118-123
- [50]张军, 杜昌雄, 张学军, 孙树江, Zhang, J., Key Lab. for Precision, Non-Traditional Machining Technology of Ministry of Education, Dalian University of Technology, Dalian 116024, China.压电式推力测试系统动态性能分析与改善[J],压电与声光,2012,34(6):936-939
- [51]Li, Ying-jun, Wang, Gui-cong, Zhang, Jun, Jia, Zhen-yuan, YJ (reprint author), Univ Jinan, Coll Mech Engn, Jinan 250022, Peoples R China..Dynamic characteristics of piezoelectric six-dimensional heavy force/moment sensor for large-lo...[J],MEASUREMENT,2012,45(5):1114-1125
- [52]Ma, Fei, Zhang, Jun, Qian, Min, Xing, Qin.Study on the Influence Caused By Temperature to a Pulsed Thrust Test Stand for the Attitude Con...[A],2012,29:194-200
- [53]张军, 钱敏.Static Properties Research of Grinding Dynamometer for Wafer Grinder[A],2012,565:603-608
- [54]张军, 刘建红, 钱敏.高灵敏度深小孔压电钻削测力仪的研制[J],机械设计与制造,2011,9:81-83
- [55]张军, 石欣, 钱敏.换向器滚压加工过程监测系统[J],仪表技术与传感器,2011,4:107-110
- [56]房庆华, 张军, 李映君, 贾振元, 钱敏, Zhang, J.(zhangj@dlut.edu.cn).轴用压电式六维大力值测力仪分载研究[J],仪器仪表学报,2011,32(2):439-444
- [57]Xing, Qin, Zhang, Jun, Qian, Min, Jia, Zhenyuan, Sun, Baoyuan, J (reprint author), Dalian Univ Technol, Key Lab Precis & Nontradit Machining Technol, Minist Educ, Dalian 116024, Peoples R China..Design, calibration and error analysis of a piezoelectric thrust dynamometer for small thrust l...[J],MEASUREMENT,2011,44(2):338-344
- [58]张军, 钱敏, 贾振元.Design and optimization of a piezoelectric thrust-measuring platform for attitude-control rocket ...[J],Applied Mechanics and Materials,2011,44:1977-1981
- [59]Liu, Wei, Li, Ying-jun, Jia, Zhen-yuan, Zhang, Jun, Qian, Min, YJ (reprint author), Dalian Univ Technol, Minist Educ, Key Lab Precis & Nontradit Machining Technol, Dalian 116024, Peoples R China..Research on parallel load sharing principle of piezoelectric six-dimensional heavy force/torque...[J],MECHANICAL SYSTEMS AND SIGNAL PROCESSING,2011,25(1):331-343
- [60]Xing, Qin, Zhang, Jun, Qian, Min, Jia, Zhenyuan, Sun, Baoyuan.Design and Optimization of a Piezoelectric Thrust-measuring Platform for Attitude-control Rocke...[A],2010,44-47:1977-1981