学位：博士
职称：教授
所在单位：材料科学与工程学院
长期从事金属材料蠕变、组织演化、损伤及寿命预测工作。主持和参加国家自然科学基金重点和面上项目6项，“863”计划课题2项，省部级及企业项目20余项。获国家发明专利5项，发表学术论文200余篇。出版专著“耐热钢持久性能的统计分析及可靠性预测”1部（科学出版社），译著“高温合金”1部，编著1部。获辽宁省教学名师，宝钢教育奖优秀教师奖。辽宁省教学成果一等奖1项，国家本科一流课程、国家精品在线开放课程负责人。Emerald出版社颁发的学术奖“Literati Club Awards for Excellence”，金属学报2009-2015年度优秀论文奖。省部级科技奖励一等奖、二等奖5项。
Room temperature creep and its effect on fatigue crack growth in a X70 steel with various microstructures
点击次数：
论文类型：会议论文
发表时间：2006-11-22
收录刊物：EI、CPCI-S
卷号：353-358
期号：PART 1
页面范围：138-141
关键字：room temperature creep; fatigue crack growth; single wave overload; the X70 steel; crack closure
摘要：Fatigue crack growth (FCG) tests have been performed in an X70 steel with various microstructures (respectively in the as-received and the normalized condition). The effect of room temperature creep (RTC) on FCG behavior has been investigated by comparing with single wave overloads (SWOL). The as-received X70 pipeline steel has high FCG rate at the near-threshold region. While at the Paris region, FCG rate seems insensitive to the microstructure. In both conditions, time-dependent deformation is observed at crack tips (i.e., RTC), which increases with increasing stress-intensity-factor. And this deformation has a high value in the normalized state, under identical testing conditions. Both RTC and SWOL can bring subsequent fatigue crack growth a very short initial acceleration before deceleration, whereas the former induces more serious deceleration and retardation, which attributes to more significant crack closures.
发表时间：2006-11-22
