学位:博士
职称:教授
所在单位:材料科学与工程学院
长期从事金属材料蠕变、组织演化、损伤及寿命预测工作。主持和参加国家自然科学基金重点和面上项目6项,“863”计划课题2项,省部级及企业项目20余项。获国家发明专利5项,发表学术论文200余篇。出版专著“耐热钢持久性能的统计分析及可靠性预测”1部(科学出版社),译著“高温合金”1部,编著1部。获辽宁省教学名师,宝钢教育奖优秀教师奖。辽宁省教学成果一等奖1项,国家本科一流课程、国家精品在线开放课程负责人。Emerald出版社颁发的学术奖“Literati Club Awards for Excellence”,金属学报2009-2015年度优秀论文奖。省部级科技奖励一等奖、二等奖5项。
Microstructure, mechanical properties and springback behaviour of Ti-6Al-4V alloy connection rod for spinal fixation device
点击次数:
论文类型:期刊论文
发表时间:2019-01-01
发表刊物:MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS
收录刊物:SCIE、PubMed、Scopus
卷号:94
页面范围:811-820
ISSN号:0928-4931
关键字:Titanium alloy; Connection rod of spinal fixation device; Strength; Modulus; Springback behaviour
摘要:The effect of annealing condition on microstructure, mechanical properties and springback behaviour was examined in the connection rod of Ti-6Al-4V alloy for spinal fixation devices. Compared with the deformed microstructure in the sample before annealing, relatively few equiaxed grains were present after annealing at 1003 K after 1.8 ks, and a considerable amount appeared at 7.2 ks. When annealing time was extended to 36 ks, the recrystallised grains further grew. Vickers hardness, tensile strength and bending strength decreased with increasing annealing time, whereas the elastic and bending moduli showed no significant change with annealing time of up to 7.2 ks and then slightly decreased at 36 ks. The springback ratio was closely associated with strength and modulus and applied bending deflection. The springback ratio reached the highest and lowest values in the sample before and after annealing for 7.2 ks, respectively. A good combination of strength, modulus and springback ratio was obtained in the sample after annealing for 7.2 ks.
发表时间:2019-01-01