学位：博士
职称：教授
所在单位：材料科学与工程学院
长期从事金属材料蠕变、组织演化、损伤及寿命预测工作。主持和参加国家自然科学基金重点和面上项目6项，“863”计划课题2项，省部级及企业项目20余项。获国家发明专利5项，发表学术论文200余篇。出版专著“耐热钢持久性能的统计分析及可靠性预测”1部（科学出版社），译著“高温合金”1部，编著1部。获辽宁省教学名师，宝钢教育奖优秀教师奖。辽宁省教学成果一等奖1项，国家本科一流课程、国家精品在线开放课程负责人。Emerald出版社颁发的学术奖“Literati Club Awards for Excellence”，金属学报2009-2015年度优秀论文奖。省部级科技奖励一等奖、二等奖5项。
Fracture Behavior of Cold Sprayed 304 Stainless Steel Coating During Cold Rolling
点击次数：
论文类型：期刊论文
发表时间：2012-11-01
发表刊物：JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL
收录刊物：SCIE、Scopus
卷号：19
期号：11
页面范围：57-63
ISSN号：1006-706X
关键字：fracture; cold spraying; cold rolling; 304 stainless steel coating; microstructure
摘要：The fracture behavior of cold sprayed 304 stainless steel coating in cold rolling process was studied. The 304 stainless steel coatings were deposited on low carbon steel substrate by cold gas dynamic spray (CGDS) and then cold rolled, respectively. The fracture morphology of the coatings was observed and analyzed, and the crack distributions along the longitudinal rolling direction of the coatings were also investigated and discussed. The results showed that the cohesive strength of the cold sprayed 304 stainless steel coating was too low to be cold rolled. Microcracks were formed in the as-sprayed coatings and ran perpendicularly to the rolling direction. The spacing distance between these cracks decreased with the increase of the cold rolling reduction. In addition, it was also found that the initial crack generated at the surface of the coating and propagated from the surface to the interface along the weakly bonded particles. A theoretical analysis was developed for the coating fracture. It gave a critical minimum cohesive bonding strength of the coating for non-breaking in cold rolling process. The crack propagation manner of the cold rolled coatings was also discussed.
发表时间：2012-11-01
