学位：博士
职称：教授
所在单位：材料科学与工程学院
长期从事金属材料蠕变、组织演化、损伤及寿命预测工作。主持和参加国家自然科学基金重点和面上项目6项，“863”计划课题2项，省部级及企业项目20余项。获国家发明专利5项，发表学术论文200余篇。出版专著“耐热钢持久性能的统计分析及可靠性预测”1部（科学出版社），译著“高温合金”1部，编著1部。获辽宁省教学名师，宝钢教育奖优秀教师奖。辽宁省教学成果一等奖1项，国家本科一流课程、国家精品在线开放课程负责人。Emerald出版社颁发的学术奖“Literati Club Awards for Excellence”，金属学报2009-2015年度优秀论文奖。省部级科技奖励一等奖、二等奖5项。
Elastic Modulus of 304 Stainless Steel Coating by Cold Gas Dynamic Spraying
点击次数：
论文类型：期刊论文
发表时间：2012-03-01
发表刊物：JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL
收录刊物：SCIE、Scopus
卷号：19
期号：3
页面范围：73-78
ISSN号：1006-706X
关键字：cold gas dynamic spraying; 304 stainless steel coating; three-point bend testing; compound beam theory; elastic modulus
摘要：304 stainless steel coating was deposited on the IF steel substrate by cold gas dynamic spraying (CGDS), and the elastic modulus of the 304 stainless steel coating was studied. The elastic modulus of cold sprayed 304 stainless steel coating was measured using the three-point bend testing and the compound beam theory, and the other mechanic parameters (such as the equivalent flexural rigidity and the moment of inertia of area) of the coatings were also calculated using this compound beam theory. It is found that the calculated results using the above methods are accurate and reliable. The elastic modulus value of the cold sprayed 304 stainless steel coating is 1. 179 X 10(5) MPa, and it is slightly lower than the 304 stainless steel plate (about 2 X 10(5) MPa). It indicates that the elastic modulus of the cold sprayed coatings was quite different from the comparable bulk materials. The main reason is that the pores and other defects are existed in the coatings, and the elastic modulus of the coatings also depends on varies parameters such as the feed stock particle size, porosity, and processing parameters.
发表时间：2012-03-01
