学位：博士
职称：教授
所在单位：材料科学与工程学院
长期从事金属材料蠕变、组织演化、损伤及寿命预测工作。主持和参加国家自然科学基金重点和面上项目6项，“863”计划课题2项，省部级及企业项目20余项。获国家发明专利5项，发表学术论文200余篇。出版专著“耐热钢持久性能的统计分析及可靠性预测”1部（科学出版社），译著“高温合金”1部，编著1部。获辽宁省教学名师，宝钢教育奖优秀教师奖。辽宁省教学成果一等奖1项，国家本科一流课程、国家精品在线开放课程负责人。Emerald出版社颁发的学术奖“Literati Club Awards for Excellence”，金属学报2009-2015年度优秀论文奖。省部级科技奖励一等奖、二等奖5项。
Influence of annealing treatment on the microstructure and mechanical performance of cold sprayed 304 stainless steel coating
点击次数：
论文类型：期刊论文
发表时间：2011-11-01
发表刊物：APPLIED SURFACE SCIENCE
收录刊物：Scopus、SCIE、EI
卷号：258
期号：2
页面范围：700-704
ISSN号：0169-4332
关键字：Cold spraying; Mechanical property; 304 stainless steel coatings; Microstructure; Annealing treatment
摘要：In this study, 304 stainless steel coatings were deposited on interstitial-free steel substrate by cold spraying method. The effect of annealing treatment on microstructure, microhardness, ultimate tensile strength and fracture performance of the coatings were studied. The results showed that annealing treatment had made a dominant contribution to heal up the incomplete interfaces between the deposited particles. Both of the microstructure and the mechanical properties have been obviously optimized by annealing treatment. In addition, the coating microhardness decreased from 345 HV(0.2) for the as-sprayed coating to 201 HV(0.2) for the annealed coating. The coating ultimate tensile strength increased from 65 MPa for the as-sprayed coating to 357 MPa for the annealed coating, which resulted from the increase of the metallurgically bonded areas in the coating induced by annealing treatment. Fracture morphology of the coatings also revealed that annealing treatment changed the fracture character of the cold sprayed 304 stainless steel coating from brittle type to plastic type. (C) 2011 Elsevier B.V. All rights reserved.
发表时间：2011-11-01
