Personal HomePage
Master Tutor
Gender:Male
Alma Mater:大连理工大学
Degree:Master's Degree
School/Department:机械工程学院
Discipline:Mechanical Manufacture and Automation. Mechatronic Engineering. Mechanical Design and Theory
Business Address:大连理工大学西部校区知方楼7116室
Contact Information:
E-Mail:
Honor
2019Previously Honored and Elected:
大连理工大学2018教学质量优良奖;
2017Previously Honored and Elected:
大连理工大学2016教学质量优良奖;
2016Previously Honored and Elected:
2014-2015学年优秀班主任;
2016Previously Honored and Elected:
大连理工大学2015教学质量优良奖;
2015Previously Honored and Elected:
大连理工大学2014年教学质量优良奖;
2014Previously Honored and Elected:
大连理工大学2013年教学质量优良奖;
2012Previously Honored and Elected:
大连理工大学2011年教学质量优良奖;
2008Previously Honored and Elected:
机械工程学院2008年教学质量优秀奖
联系电话 :
Indexed by:Journal Article
Date of Publication:2012-06-20
Journal:工具技术
Included Journals:ISTIC
Volume:46
Issue:6
Page Number:13-16
ISSN:1000-7008
Key Words:高速切削;正交试验;切削力;切削用量;经验公式
Abstract:通过正交设计方案,对淬硬到60HRC的冷作模具钢Cr12MoV进行高速车削切削力试验,分析了切削用量和刀具变量对切削力的影响规律,并建立了切削力的经验公式.得到如下结论:切削用量中,切削速度对切削力影响最小,进给量和背吃刀量对切削力影响较大；三个方向力中,轴向力最小,径向力和主切削力相接近,与常规切削相比,径向力偏大；小刀尖圆弧半径的PCBN刀具是进行高速切削淬硬钢时的理想刀具；经验公式预测值与实测值之间存在约5％-20％的误差.
