Personal HomePage
Master Tutor
Gender:Male
Alma Mater:大连理工大学
Degree:Master's Degree
School/Department:机械工程学院
Discipline:Mechanical Manufacture and Automation. Mechatronic Engineering. Mechanical Design and Theory
Business Address:大连理工大学西部校区知方楼7116室
Contact Information:
E-Mail:
Honor
2019Previously Honored and Elected:
大连理工大学2018教学质量优良奖;
2017Previously Honored and Elected:
大连理工大学2016教学质量优良奖;
2016Previously Honored and Elected:
2014-2015学年优秀班主任;
2016Previously Honored and Elected:
大连理工大学2015教学质量优良奖;
2015Previously Honored and Elected:
大连理工大学2014年教学质量优良奖;
2014Previously Honored and Elected:
大连理工大学2013年教学质量优良奖;
2012Previously Honored and Elected:
大连理工大学2011年教学质量优良奖;
2008Previously Honored and Elected:
机械工程学院2008年教学质量优秀奖
联系电话 :
Indexed by:Journal Article
Date of Publication:2009-01-01
Journal:中国机械工程
Included Journals:CSCD、ISTIC、PKU、Scopus
Volume:20
Issue:3
Page Number:365-369
ISSN:1004-132X
Key Words:金刚石; 硬质合金; 钎焊; 抗剪强度
Abstract:通过聚晶金刚石复合片与YG8硬质合金的高频感应钎焊试验,研究了不同钎料钎剂搭配对高频感应钎焊接头抗剪强度、焊缝厚度的影响,并用扫描电镜和电子探针
观察、分析了焊缝的微观结构.结果表明,690℃钎焊温度下含Mn的1号钎料和活性温度较高的QJ102钎剂是最佳搭配方案.探讨了聚晶金刚石复合片的特
殊钎焊工艺,认为采用复焊方法可以大幅提高钎焊接头的抗剪强度.
