Personal HomePage
Master Tutor
Gender:Male
Alma Mater:大连理工大学
Degree:Master's Degree
School/Department:机械工程学院
Discipline:Mechanical Manufacture and Automation. Mechatronic Engineering. Mechanical Design and Theory
Business Address:大连理工大学西部校区知方楼7116室
Contact Information:
E-Mail:
Honor
2019Previously Honored and Elected:
大连理工大学2018教学质量优良奖;
2017Previously Honored and Elected:
大连理工大学2016教学质量优良奖;
2016Previously Honored and Elected:
2014-2015学年优秀班主任;
2016Previously Honored and Elected:
大连理工大学2015教学质量优良奖;
2015Previously Honored and Elected:
大连理工大学2014年教学质量优良奖;
2014Previously Honored and Elected:
大连理工大学2013年教学质量优良奖;
2012Previously Honored and Elected:
大连理工大学2011年教学质量优良奖;
2008Previously Honored and Elected:
机械工程学院2008年教学质量优秀奖
联系电话 :
Indexed by:Journal Article
Date of Publication:2016-05-11
Journal:金刚石与磨料磨具工程
Included Journals:ISTIC、Scopus
Volume:36
Issue:2
Page Number:43-48
ISSN:1006-852X
Key Words:单层钎焊金刚石薄壁钻;氮化硅陶瓷;去除机理;加工效率
Abstract:使用单层钎焊金刚石薄壁钻,进行钻磨氮化硅陶瓷的试验。首先研究氮化硅陶瓷材料的去除机理,主要包括脆性去除和塑性去除,且脆性去除占主要部分。其次研究刀具壁厚、主轴转速和钻压对加工效率的影响。结果表明：三个参数存在的最佳值分别为1.5 mm、710 r/min和613 N；并且壁厚不宜超过2 mm,主轴转速不宜超过900 r/min,钻压应在500~705 N 范围内,钻压低于330 N 时刀具会打滑。
