点击次数：

论文类型：期刊论文

发表时间：2016-02-01

发表刊物：EXPERIMENTAL TECHNIQUES

收录刊物：SCIE、EI、Scopus

卷号：40

期号：1

页面范围：381-390

ISSN号：0732-8818

关键字：Electro-Mechanical Impedance Technique; Excitation Voltage; Structural Health Monitoring

摘要：A high excitation voltage electrical impedance measurement system (HEVEIMS) of electro-mechanical impedance (EMI)-based structural health monitoring (SHM) was established in this study. Low and middle voltage output options of ARB-1410 wave generation card were used to excite the PZT sensor. The electrical impedance signal of piezoelectric lead zirconate titanate (PZT) sensor was measured by DPO-4032 digital oscilloscope and voltage divisional impedance measurement circuit. Circular PZT sensor of 14mm diameter and 0.2mm thickness was used in this study. In the frequency ranges of 10-60, 100-150, 200-250, 250-300, and 300-350 kHz, the modulus, real, and imaginary part of the PZT impedance were measured with HEVEIMS and WK6500B precision impedance analyzer, respectively. Comparison of the results with the two instruments indicates that the measurement accuracy of the HEVEIMS established in this paper is quite high. A 1.2mm diameter hole drilled at 1000mm from the PZT center was further tested with EMI technique, at various excitation voltages (EVs) from 1 to 30 V by HEVEIMS. At high EV, the sensitivity of EMI technique increases to some extent due to the increase of PZT generation force.