• 更多栏目

    王忠涛

    • 教授     博士生导师   硕士生导师
    • 主要任职:科学技术研究院副院长兼科技发展研究院院长、人文社科研究院院长
    • 性别:男
    • 毕业院校:大连理工大学
    • 学位:博士
    • 所在单位:土木工程系
    • 学科:岩土工程
    • 办公地点:综合实验1号楼213室
    • 联系方式:Zhongtao@dlut.edu.cn
    • 电子邮箱:zhongtao@dlut.edu.cn

    访问量:

    开通时间:..

    最后更新时间:..

    Numerical analysis and centrifuge modeling of shallow foundations

    点击次数:

    论文类型:期刊论文

    发表时间:2014-04-01

    发表刊物:CHINA OCEAN ENGINEERING

    收录刊物:EI、ISTIC、SCIE、Scopus

    卷号:28

    期号:2

    页面范围:163-180

    ISSN号:0890-5487

    关键字:non-coaxial model; strain softening; FEM analysis; centrifuge test; shallow foundation

    摘要:The influence of non-coaxial constitutive model on predictions of dense sand behavior is investigated in this paper. The non-coaxial model with strain softening plasticity is applied into finite-element program ABAQUS, which is first used to predict the stress-strain behavior and the non-coaxial characteristic between the orientations of the principal stress and principal plastic strain rate in simple shear tests. The model is also used to predict load settlement responses and bearing capacity factors of shallow foundations. A series of centrifuge tests for shallow foundations on saturated dense sand are performed under drained conditions and the test results are compared with the corresponding numerical results. Various footing dimensions, depths of embedment, and footing shapes are considered in these tests. In view of the load settlement relationships, the stiffness of the load-displacement curves is significantly affected by the non-coaxial model compared with those predicted by the coaxial model, and a lower value of non-coaxial modulus gives a softer response. Considering the soil behavior at failure, the coaxial model predictions of bearing capacity factors are more advanced than those of centrifuge test results and the non-coaxial model results; besides, the non-coaxial model gives better predictions. The non-coaxial model predictions are closer to those of the centrifuge results when a proper non-coaxial plastic modulus is chosen.