陈贵军

个人信息Personal Information

教授

硕士生导师

性别:男

毕业院校:大连理工大学

学位:硕士

所在单位:能源与动力学院

电子邮箱:chengj@dlut.edu.cn

扫描关注

论文成果

当前位置: 中文主页 >> 科学研究 >> 论文成果

Titanium nitride selective absorber enhanced solar thermoelectric generator (SA-STEG)

点击次数:

论文类型:期刊论文

发表时间:2018-08-01

发表刊物:APPLIED THERMAL ENGINEERING

收录刊物:SCIE

卷号:141

页面范围:828-834

ISSN号:1359-4311

关键字:Solar selective absorber; Solar thermoelectrics; Photonic crystal; Spectral control

摘要:Solar thermoelectric generator (STEG) system has been intensively studied due to its reliability and environment-friendly property. In a STEG system, a solar absorber is an important component because it not only absorbs the solar energy, but also emits photons to environment as radiation heat loss. In this study, a selective absorber enhanced STEG system (SA-STEG) is presented. A Titanium nitride (TiN) based 2D photonic crystal (PhC) selective absorber is fabricated, which possesses a high absorptivity at short wavelength range to fully absorb the solar energy, but a suppressed absorptivity at long wavelength range to avoid the radiation loss. The selective absorber also keeps a good wavelength selectivity even after a thermal annealing over 1000 K. The selective absorptivity data were imported into the SA-STEG model and an improvement was obtained: for a Lead telluride STEG system, a 28 K temperature increase was achieved, and for a Silicon germanium alloy STEG system a 32 K temperature increase was achieved. The increased temperature yields a larger open-circuit voltage output. These results were attained based on a 40 x 40 mm(2) STEG system and this value is expected to be further increased if a larger thermoelectric generator is employed.