location: Current position: Home >> Scientific Research >> Paper Publications

Regeneration of lamina TS-1 catalyst in the epoxidation of propylene with hydrogen peroxide

Hits:

Indexed by:期刊论文

Date of Publication:2004-09-01

Journal:CATALYSIS LETTERS

Included Journals:Scopus、SCIE、EI

Volume:97

Issue:3-4

Page Number:223-229

ISSN No.:1011-372X

Key Words:propylene; propylene oxide; epoxidation; lamina TS-1; deactivation; regeneration

Abstract:The deactivation and regeneration of the lamina titanium silicalite (TS-1) catalyst for the epoxidation of propylene with dilute H2O2 was investigated in a fixed-bed reactor. In the scale-up experiment, the dosage of the lamina TS-1 catalyst is 2.5 kg, after 1000 h reaction the catalyst still exhibits good performance and further increases the reaction time, the conversion of H2O2 begins to decrease. TG and BET analyses of the deactivated catalysts show that the main species occluded within the zeolite pore are propylene oxide oligomers, and these species occupying the active Ti site and blocking the pores of the lamina TS-1 are the main reason for the deactivation of catalyst. The deactivated catalyst can be regenerated by different regeneration methods. The activity of deactivated catalysts regenerated by dilute H2O2 or heat treatment by using air or nitrogen as a calcination media can be fully recovered, but a decline in propylene oxide (PO) selectivity of the regenerated catalyst has been observed during the first hours of reaction. However, water vapor treatment of the deactivated catalyst can improve the PO selectivity with the same activity as that of the fresh lamina TS-1 catalyst.

Pre One:Effect of solvent on the propylene epoxidation over TS-1 catalyst

Next One:异丙醇氧化与丙烯环氧化集成反应