点击次数：

论文类型：期刊论文

发表时间：2010-09-24

发表刊物：VACUUM

收录刊物：SCIE、EI、Scopus

卷号：85

期号：3

页面范围：406-410

ISSN号：0042-207X

关键字：PVC tube; Hydrophilicity; DC glow discharge

摘要：A DC glow discharge plasma was generated inside polymer tube at low pressure. The polyvinyl chloride (PVC) tube with 4 mm inner diameter and 50 mm length was treated by Ar plasma generated inside the tube. The hydrophilic property of the inner surface of the PVC tube was remarkably improved after the plasma treatment. The water contact angle of the inner surface decreased to 37 degrees from 75 degrees for the untreated sample as the treatment time increase to 30 min. The water contact angle of plasma-treated PVC tube decreases with increasing applied voltage, but increase with increase in working pressure. When the Ar plasma-treated PVC tubes are stored in air at room temperature, the contact-angles of the inner surface quickly increases and finally reaches a plateau value which is still considerably lower than the 75 degrees for the untreated sample. (C) 2010 Elsevier Ltd. All rights reserved.