|
个人信息Personal Information
教授
博士生导师
硕士生导师
任职 : 中国体视学会材料科学分会理事；中国体视学会金相分会理事
性别：男
毕业院校：东北大学
学位：博士
所在单位：材料科学与工程学院
学科：材料学
办公地点：新三束实验室（4号楼）305
联系方式：13390512391
电子邮箱：wynmm@dlut.edu.cn
扫描关注
- [141]王轶农.Recrystallization behavior induced by compressive-twinning in an AZ31 magnesium alloy[A],2012
- [142]王轶农.Influence of initial orientation on compression mechanical properties in a hot-extruded AZ31 magn...[A],2012
- [143]王轶农.Static recrystallization induced by tension twinning in AZ31 magnesium alloy[A],2012
- [144]Wang, Yinong, Kang, Suk Bong, Cho, Jaehyung, SB (reprint author), Korea Inst Mat Sci, Chang Won 641010, South Korea..Microstructure and mechanical properties of Mg-Al-Mn-Ca alloy sheet produced by twin roll casti...[J],JOURNAL OF ALLOYS AND COMPOUNDS,2011,509(3):704-711
- [145]王轶农.Microstructure and mechanical properties of Mg–Al–Mn–Ca alloy sheet[J],Journal of Alloys and Compounds,2011,509(1):704-711
- [146]Wang, Yinong, Kang, Suk Bong, Cho, Jaehyung, SB (reprint author), Korea Inst Mat Sci, 66 Sangnam Dong, Chang Won 641010, Kyungsangnam Do, South Korea..Microstructural evolution of twin-roll cast Mg-3Al-0.5Mn-0.2Mm alloys during warm rolling and s...[J],JOURNAL OF MATERIALS PROCESSING TECHNOLOGY,2010,210(10):1270-1275
- [147]王轶农.Microstructural evolution of twin-roll cast Mg–3Al–0.5Mn–0.2Mm alloys during[J],Journal of Materials Processing Technology,2010,210(12):1270-1275
- [148]王轶农.Control of texture and ductility in wrought magnesium alloy sheets fabricated by asymmetric hot-e...[A],2010
- [149]王轶农.Microstructural evolution and mechanical properties in twin roll cast and warm rolled Mg-Al-Mn al...[A],2010
- [150]Chang, L. L., Wang, Y. N., Zhao, X., Qi, M., YN (reprint author), Dalian Univ Technol, Dept Mat Sci & Engn, Dalian 116024, Peoples R China..Grain size and texture effect on compression behavior of hot-extruded Mg-3Al-1Zn alloys at room...[J],MATERIALS CHARACTERIZATION,2009,60(9):991-994
- [151]Zhen, Bin, Wang, Yi Nong, Qi, Min, Williams, Elissa H., M (reprint author), Dalian Univ Technol, Sch Mat Sci & Engn, Dalian 116024, Liaoning, Peoples R China..Phase boundary effects on the mechanical deformation of core/shell Cu/Ag nanoparticles[J],JOURNAL OF MATERIALS RESEARCH,2009,24(7):2210-2214
- [152]Chang, L. L., Shang, E. F., Wang, Y. N., Zhao, X., Qi, M., YN (reprint author), Dalian Univ Technol, Dept Mat Sci & Engn, Dalian 116024, Liaoning, Peoples R China..Texture and microstructure evolution in cold rolled AZ31 magnesium alloy[J],MATERIALS CHARACTERIZATION,2009,60(6):487-491
- [153]王开东, 常丽丽, 王轶农, 黄志青, Wang, Y.-N.(wynmm@dlut.edu.cn).搅拌摩擦加工技术制备Ti颗粒增强AZ31镁基复合材料[J],中国有色金属学报,2009,19(3):418-423
- [154]王轶农.Improvement of ductility in Mg-AZ31 alloy sheet fabricated by asymmetric hot extrosion[A],2009,240-240
- [155]王轶农.Grain size and Texture Effect on Compression Behavior of Hot-extruded Mg-3Al-1Zn[J],Materials Characterization,2009,60(4):991-994
- [156]郑斌, 周伟, 王轶农, 齐民, Wang, YN (reprint author), Dalian Univ Technol, Sch Mat Sci & Engn, Dalian 116024, Peoples R China..Landau理论研究TiNi顺磁合金热/强磁场耦合下的马氏体相变[J],金属学报,2009,45(1):37-42
- [157]Chang Li-li, Wang Yi-nong, Zhao Xiang, Wang, YN (reprint author), Dalian Univ Technol, Dept Mat Sci & Engn, Dalian 116024, Peoples R China..Modeling of severe deformation and mechanical properties in Mg-3Al-1Zn alloy through asymmetric...[J],TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA,2008,18(,1):S257-S262
- [158]Chang, L. L., Huang, J. C., Zhao, X., Wang, Y. N., YN (reprint author), Dalian Univ Technol, Dept Mat Sci & Engn, Dalian 116024, Peoples R China..Microstructure and mechanical properties in an AZ31 magnesium alloy sheet fabricated by asymmet...[J],MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,2008,496(1-2):512-516
- [159]于凤云, 王轶农, 蒋奇武, Yu, F.-Y..深冲IF钢再结晶{111}纤维织构形成机制探讨[J],材料科学与工艺,2008,16(5):724-727
- [160]Zheng, B., Chen, C. L., Qi, M., Wang, Y. N., B (reprint author), Dalian Univ Technol, Sch Mat Sci & Engn, Dalian 116024, Peoples R China..An examination of surface stress effects and deformation mechanisms in Al-Cu nanowires[J],MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING,2008,16(4)