|
个人信息Personal Information
教授
博士生导师
硕士生导师
任职 : 国际磨粒技术学会（International Committee of Abrasive Technology, ICAT）委员，中国机械工程学会极端制造分会副主任、生产工程分会常务委员、微纳米制造技术分会常务委员，中国机械工程学会生产工程分会磨粒加工技术专业委员会副主任、切削加工专业委员会常委委员、精密工程与微纳技术专业委员会常委委员，中国机械工程学会特种加工分会超声加工技术委员会副主任，中国机械工程学会摩擦学分会微纳制造摩擦学专业委员会常务委员，中国机械工业金属切削刀具协会切削先进制造技术研究会常务理事、对外学术交流工作委员会副主任、切削先进制造技术研究会自动化加工技术与系统委员会副主任。
性别：男
毕业院校：西北工业大学
学位：博士
所在单位：机械工程学院
学科：机械制造及其自动化. 机械电子工程. 航空宇航制造工程
办公地点：机械工程学院7191
电子邮箱：kangrk@dlut.edu.cn
Three-point-support method based on position determination of supports and wafers to eliminate gravity-induced deflection of wafers
点击次数：
论文类型：期刊论文
发表时间：2016-10-01
发表刊物：PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
收录刊物：SCIE、EI、Scopus
卷号：46
页面范围：339-348
ISSN号：0141-6359
关键字：Three-point-support method; Position determination; Gravity-induced deflection; Large and thin panels
摘要：The flatness measurement of large and thin wafers is affected greatly by gravity. Inverting method is often used to cancel the effect. However, it is required that the positions of the supports and wafers are perfectly symmetric about the inversion axis. In this study a three-point-support method based on position determination of supports and wafers was proposed. The supporting balls and the wafer were placed in arbitrary positions and their positions were obtained by measurement and fed into the FEM model which was developed to calculate the gravity-induced deflection (GID). The methods to acquire the positions of the supports and the wafer were proposed. The position measurement accuracy of the supports was improved greatly by circle fitting to the profile of the supporting ball. Wafer edge point was obtained accurately as the intersection point between the wafer surface line and the edge profile. The method to measure the wafer thickness using only one displacement sensor on the same equipment was presented. The simulation results were verified by experimental results. The centering device for the wafer and the positioning accuracy requirements of the supports are not needed any more. The effect of the positions of the supports and the wafer was reduced to be less than 1 mu m for a 300 mu m diameter and 397 mu m thickness wafer with GID over 140 mu m. This method could also be used for accurate flatness measurement of other large and thin panels. (C) 2016 Elsevier Inc. All rights reserved.