Hits:

Indexed by:期刊论文

Date of Publication:2013-10-01

Journal:DESALINATION

Included Journals:SCIE、EI、Scopus

Volume:326

Page Number:109-114

ISSN No.:0011-9164

Key Words:Electrosorption; CNTs/Ca-Selective zeolite composite electrode; Calcium ions; Electrophoretic deposition (EPD); Selectivity

Abstract:Electrophoretic deposition (EPD) method was used to fabricate Carbon nanotubes (CNTs) and Ca-Selective zeolite composite electrode. The prepared electrode was employed in electrosorption of calcium ions in capacitive deionization. The morphology, porous size distribution, pore volume and electrochemical properties were characterized by scanning electron microscopy, N-2 adsorption at 77 K and Cyclic Voltammetry (CV), respectively. The results obtained from experiments showed that the optimum proportion between CNTs and zeolite was 1:4. It was also found that the optimum applied electrosorption voltage was 2.0 V and the maximum equilibrium electrosorption capacity was 25 mg/g with initial Ca2+ concentration of 750 mg/L The electrosorption process could be validated by both of pseudo first and second order kinetic models. Furthermore, the selective ion electrosorption experiments were repeated in solution with different ions, and it was observed that the electrosorption capacities of cations on the CNTs composite electrode followed the order of Ca2+ > Mg2+ > Na+. Finally, the prepared electrode can be reused in long-term electrosorption process. (C) 2013 Elsevier B.V. All rights reserved.