的个人主页 http://faculty.dlut.edu.cn/2002011088/zh_CN/index.htm
点击次数:
论文类型:期刊论文
发表时间:2021-01-29
发表刊物:ENERGY & FUELS
卷号:31
期号:2
页面范围:1318-1328
ISSN号:0887-0624
摘要:The influence of temperature on the product distributions of oil sand fast pyrolysis was studied by a combined pyrolyzer-gas chromatography/mass spectrometry (Py-GC/MS) technique. Characteristics of the organic structure in bitumen deduced from the pyrolytic products and given by H-1/C-13 nuclear magnetic resonance (NMR) spectrometry were compared as well. The oil sand sample was pyrolyzed at temperatures from 300 to 650 degrees C in intervals of 50 degrees C in an inert atmosphere (helium gas), and more than 200 types of compounds were detected, including carbon dioxide, aliphatics (alkanes, cycloalkanes, olefins, dialkenes, cycloolefins), aromatics (alkyl benzenes, alkyl naphthalenes, alkyl indenes), oxygen-containing compounds, and sulfur containing compounds. From the evolution of the product yields, it was clearly observed that temperature affected both the primary and secondary reactions during fast pyrolysis. Major thermal cracking took place until about 400 degrees C, as evidenced by a dramatic increase in product species and yields. However, temperatures higher than 600 degrees C were beneficial for generating smaller molecules as products. Among the pyrolytic products, alkanes and olefins were predominant and were mainly derived from the thermal cracking of abundant polymethylene substituents linking to the aromatic cores. It was found that the yields of alkanes and olefins decreased with increasing carbon number, and more olefins were generated at higher temperatures. Monoaromatics with more alkyl or alkenyl multisubstituent groups appeared above 400 degrees C, but the substituent groups were no longer than isopropyl. In the range of 300-650 degrees C, few polycyclic aromatic hydrocarbons were observed. Higher temperatures also obviously enriched the species of naphthalene, indene, and compounds with heteroatoms. In addition, the raw aliphatic sulfur in the sample tended to be converted into sulfur-containing heterocycles during fast pyrolysis in an inert atmosphere. The results of this study show that both the NMR and Py-GC/MS methods can provide information on the organic structures in oil sand. However, NMR spectrometry is able to present an overview of the structure of hydrocarbons, whereas Py-GC/MS can help to deduce some characteristics of the macromolecules in oil sand organics.